Foundry & Investment Casting
Silanes for Heat-Cured Foundry Cores
A heat-cured core needs sound grain-to-binder contact as it leaves the heated box, cools and moves into storage. Silanes for heat-cured foundry cores give you a way to develop that interface while matching the resin's room-temperature handling and response to heat.
LANDUSIL supplies amino and ureido silanes for hot-box and warm-box binder formulators and core-making teams. Select the functional group and treatment route around your actual furan, phenolic or modified resin, then follow the core through shooting, heating, ejection and later conditioning.

What Silanes for Heat-Cured Foundry Cores Do
- Develop silica–resin contact. Hydrolyzable groups provide a mineral-side treatment route, with organic functionality selected for the receiving binder.
- Offer different amino environments. Primary, diamino and N-phenyl secondary-amino structures support purposeful chemistry comparisons.
- Provide a ureido option. A ureido-functional silane adds another interface direction for a compatible heat-cured resin.
- Fit sand or resin preparation. Controlled pretreatment and resin incorporation let you place the ingredient at a defined point in production.
- Focus development on usable strength. Compare the interface through hot removal, cooling, humid core storage and subsequent coating.
Typical Uses
End use: Furan or phenolic hot-box resin sand
What matters most
Resin–catalyst compatibility, mixed-sand handling and strength during ejection
End use: Warm-box sand cores
What matters most
Latent acid catalyst response, room-temperature usability and the actual heating cycle
End use: Urea- or melamine-modified resin systems
What matters most
Actual resin identity, addition stream and aged-blend compatibility
End use: Thin cores and heavier sections
What matters most
Filling, local heat history, surface and center cure, removal damage
End use: Cores coated or heated before pouring
What matters most
Humidity conditioning, coating contact, thermal history and gas behavior
Recommended LANDUSIL Products
| Product | Chemistry | CAS | Why choose it |
|---|---|---|---|
| LANDUSIL LEGRA 1010-L | 3-Aminopropyltriethoxysilane | 919-30-2 | Primary-amino ethoxy route for a compatible sand–resin interface |
| LANDUSIL LEGRA 1011-L | 3-Aminopropyltrimethoxysilane | 13822-56-5 | Methoxy comparison for defining treatment and residual-liquid controls |
| LANDUSIL LEGRA 1021-L | N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane | 1760-24-3 | Primary-plus-secondary amine structure for a defined catalyst-compatibility comparison |
| LANDUSIL LEGRA 1031-L | 3-Aminopropylmethyldimethoxysilane | 3663-44-3 | Primary-amino option with two hydrolyzable methoxy groups at silicon |
| LANDUSIL LEGRA 1051-L | N-Phenyl-3-aminopropyltrimethoxysilane | 3068-76-6 | N-phenyl secondary-amino structure for compatible phenolic-oriented development |
| LANDUSIL LEGRA 7011-L | 3-Ureidopropyltrimethoxysilane | 23843-64-3 | Ureido-functional alternative assessed with the identified resin and heat response |
How to Select a Silane for Hot-Box or Warm-Box Sand
Start with the thermosetting package
Identify the furan, phenolic, urea-modified or melamine-modified resin and its matched catalyst. Record the addition sequence and the period for which the ingredient will remain in the resin. This lets you compare fresh and aged blends before moving to mixed-sand trials.
For warm-box development, define the resin and latent acid catalyst together. Their response establishes the heat-triggered cure window. Select interface chemistry within that package and retain the established production formulation as the reference.
Compare both ends of the molecule
LEGRA 1010-L and LEGRA 1011-L each carry one primary amine; LEGRA 1021-L has primary and secondary amino sites. LEGRA 1051-L carries one secondary amine with phenyl attached to nitrogen. These differences help you frame a resin-compatibility question.
At silicon, LEGRA 1031-L has two methoxy groups and one methyl group, while the listed trialkoxy silanes have three hydrolyzable groups. Ethoxy hydrolysis releases ethanol; methoxy hydrolysis releases methanol. Account for those liquids and the treatment's water balance.
Locate the addition step
For sand pretreatment, define hydrolysis, coverage, drying and storage, then record the treated sand's condition at mixing. For resin addition, choose a compatible stream and follow viscosity, blend uniformity and gel development over the intended storage period.
Report input against sand, binder or active material, with the carrier identified. A clearly stated basis helps you compare structures and delivery routes while keeping the binder and catalyst settings traceable.
Application and Evaluation Guidelines
Keep sand grading, fines, moisture, temperature and reclaimed content consistent. Evaluate mixed-sand bench life through transfer, shooting and compaction at the ages used in production. Record incomplete filling or local density changes before interpreting a weak region as an interface problem.
Map actual tooling conditions and the thermal path through representative thin and thick sections. Inspect surface and center cure, hot ejection strength, edge damage and dimensions after cooling. Use the same dwell and heat input when assessing an ingredient's contribution; record a changed heating or catalyst program as another trial condition.
Amino functionality can affect the selected catalyst environment. A ureido group is not a urea resin or a complete curing package, and phenyl substitution does not establish a thermal rating. A silane cannot define a warm-box system through a lower machine setpoint. Establish the working window with the complete resin–catalyst formulation.
Compare hot removal strength, cooled strength, humidity-conditioned retention and the result after any prescribed heat treatment. Include the intended coating and drying sequence with a matching thermal-history reference. Gas evolution, behavior during pouring and casting quality require relevant later trials. Set dosage, tooling conditions and acceptance criteria from this development work and current grade information.

Frequently Asked Questions
Which silanes can I compare for hot-box resin sand?
Start with amino-functional LEGRA 1010-L and ureido-functional LEGRA 7011-L in the actual resin–catalyst package. Add another amino structure when its functionality answers a defined compatibility or interface question.
What should I measure for a warm-box trial?
Follow mixed-sand usability, box filling, the heating cycle, ejection integrity and cooled strength. Include stored resin blends and humidity-conditioned cores when these stages are part of production.
How does a dialkoxy silane differ from a trialkoxy silane?
LEGRA 1031-L has two hydrolyzable methoxy groups and a methyl group at silicon. Trialkoxy grades have three hydrolyzable groups, giving a different silicon-side structure to compare within the formulation.
How much silane is needed in heat-cured sand?
Develop the level around sand surface, binder chemistry and addition route. Define the active-input basis and compare workability, cure and conditioned strength against your existing binder.

Samples and Technical Support
LANDUSIL provides samples, TDS, SDS and selection support for heat-cured sand-interface development. Please include:
- Resin family, modification and matched catalyst
- Sand analysis, reclaimed fraction and intended addition route
- Mixed-sand use period, tooling conditions and core geometry
- Ejection, cooling, humidity, coating and gas-evaluation requirements
- Estimated quantity, packaging preference and destination country

