Silicone fundamentals
What Are Silicones? Structure, Types, Properties and Industrial Uses
Silicones are synthetic polymers with an alternating silicon–oxygen (Si–O–Si) backbone and organic side groups, usually methyl. This part-inorganic, part-organic structure gives them heat resistance, flexibility, water repellency and chemical stability, which is why they are used in sealants, coatings, release agents, rubbers and fluids.

This guide explains what silicones are made of, how their structure shapes their performance, the main types used in industry, how silicones differ from silanes, and how to choose the right product for your application. It is written for buyers, formulators and distributors who are new to silicone chemistry or want a clear reference.
Watch: What Are Silicones?
Prefer a quick overview first? Watch our video below, then read on for the technical details.
1. What are silicones made of?
Silicones start with one of the most abundant materials on Earth: quartz sand (silicon dioxide). The industrial route runs in four steps:
- Quartz to silicon metal. Quartz is reduced with carbon in an electric arc furnace to produce metallurgical-grade silicon.
- Silicon to chlorosilanes. In the direct process (Müller–Rochow process), powdered silicon reacts with methyl chloride over a copper catalyst. The main product is dimethyldichlorosilane, along with other methylchlorosilanes that are separated by distillation.
- Chlorosilanes to siloxanes. Hydrolysis of the chlorosilanes forms silanols, which condense into linear and cyclic siloxanes.
- Siloxanes to silicone products. The siloxanes are polymerized and, depending on the target product, modified, compounded or crosslinked into fluids, elastomers, resins and emulsions.
Silicon vs silicone vs silica
These three words are often confused, but they describe very different materials:
| Term | What it is | Typical form | Typical uses |
|---|---|---|---|
| Silicon (Si) | A chemical element; a metalloid | Grey crystalline solid | Semiconductors, solar cells, alloys, raw material for silicones |
| Silicone | A synthetic polymer with an Si–O–Si backbone and organic side groups | Fluids, rubbers, resins, emulsions | Sealants, coatings, release agents, lubricants, textile finishes |
| Silica (SiO₂) | Silicon dioxide, an inorganic oxide | Quartz, sand, fumed or precipitated powder | Glass, fillers, reinforcement for silicone rubber, desiccants |
In short: silicon is the element, silica is its oxide, and silicones are polymers made from silicon.
2. The chemical structure of silicones
The simplest and most common silicone is polydimethylsiloxane (PDMS), with the repeating unit –[Si(CH₃)₂–O]–. Two structural features explain most of its behavior.
The Si–O backbone. The silicon–oxygen bond is stronger than the carbon–carbon bond found in most organic polymers, which gives silicones high thermal and oxidative stability. The Si–O–Si linkage is also very flexible: the chain rotates easily, so silicones stay soft and pliable at low temperatures where many organic polymers become brittle.
The organic side groups. The groups attached to silicon tune the properties:
- Methyl – the standard group; low surface energy, water repellency, good general stability
- Phenyl – improves high- and low-temperature performance, radiation resistance and compatibility with organic materials
- Vinyl – provides reactive sites for crosslinking (curing) of rubbers
- Hydrogen (Si–H) – reactive group used in addition-cure systems and water-repellent treatments
- Functional organic groups (amino, epoxy, polyether, etc.) – improve compatibility, adhesion or surface activity in specific formulations
Building blocks: M, D, T and Q units. Silicone chemists describe structures using four units, defined by how many oxygen atoms bond to each silicon atom:
| Unit | Oxygen bonds per Si | Role in the polymer |
|---|---|---|
| M | 1 | Chain end (“stopper”) |
| D | 2 | Linear chain segment |
| T | 3 | Branch point |
| Q | 4 | Fully crosslinked node |
Linear, D-rich structures give fluids. Lightly crosslinked long chains give elastomers. T- and Q-rich networks give hard resins. This is why one chemistry can produce materials as different as a light oil and a rigid coating.
3. Key properties of silicones
| Property | Where it comes from | What it means in practice |
|---|---|---|
| Wide service temperature range | Strong Si–O bonds and a flexible backbone | Performance stays stable in both hot and cold environments |
| Weather and UV resistance | Si–O backbone resists oxidation and UV breakdown | Long service life outdoors |
| Water repellency | Methyl groups facing outward | Moisture protection, water-repellent coatings |
| Low surface tension | Low-energy methyl surface | Excellent spreading, wetting, defoaming and release |
| Electrical insulation | Methyl-shielded, low-polarity surface and low moisture absorption | Use in electrical and electronic components |
| Good chemical stability | Stable backbone | Resists many chemicals; can degrade under strong acids or strong bases |
| Physiological inertness | Low reactivity with biological systems | Suitable grades are used in personal care, food-contact and medical applications |
Exact performance values depend on the grade and formulation. Always check the Technical Data Sheet (TDS) of the specific product.
4. Main types of silicones
Silicone products are usually grouped by physical form, which depends on molecular weight and degree of crosslinking.
Silicone fluids
Linear, non-crosslinked polymers—most commonly PDMS—from water-thin to very thick. Modified fluids carry functional groups such as amino, polyether or hydride. See DUVERA silicone fluids.
Silicone elastomers
Long chains crosslinked into a rubbery solid, usually reinforced with silica: HTV/HCR, LSR and RTV systems. See silicone manufacturing materials.
Silicone resins
Highly branched networks rich in T and Q units that form hard, heat- and weather-resistant films. See NOVERA silicone resins.
Silicone emulsions
Silicone fluids or resins dispersed in water—a delivery form, not a separate chemical class. See SIVERA formulations.
Silicone fluids (silicone oils)
Silicone fluids are linear, non-crosslinked polymers available in a wide range of viscosities. Modified silicone fluids carry functional groups for better compatibility or reactivity. Common uses include lubricants, defoamers, release agents, softeners, coating additives and personal care ingredients.
Silicone elastomers (silicone rubber)
Elastomers are long silicone chains that are crosslinked (cured) into a rubbery solid, usually reinforced with fillers such as silica. Main categories:
- HTV / HCR (high-temperature vulcanizing / high-consistency rubber) – cured with heat using peroxide or platinum catalysts; molded and extruded parts
- LSR (liquid silicone rubber) – a pumpable, platinum-cured system for injection molding of precision parts
- RTV (room-temperature vulcanizing) – one-part RTV cures with atmospheric moisture (common in sealants); two-part RTV is used for mold making, potting and encapsulation

Silicone resins
Silicone resins are highly branched, three-dimensional networks rich in T and Q units. They form hard films with good heat and weather resistance and are used in heat-resistant coatings, masonry water repellents, electrical insulating varnishes and as binders.
Silicone emulsions
Silicone emulsions are dispersions of silicone fluids or resins in water, stabilized with emulsifiers. They make silicones easy to use in water-based systems. Typical uses include release agents, textile finishing, polishes and water-based coatings.
| Type | Structure | Physical form | Typical applications |
|---|---|---|---|
| Fluids | Linear, no crosslinking | Liquid | Lubrication, defoaming, release, softening, additives |
| Elastomers | Lightly crosslinked long chains | Rubber | Seals, gaskets, molded parts, sealants, potting |
| Resins | Highly crosslinked network | Hard film or solid | Heat-resistant coatings, binders, water repellents |
| Emulsions | Fluid or resin dispersed in water | Milky liquid | Release agents, textiles, water-based formulations |
5. Silicones vs silanes: what’s the difference?
Silanes are often mentioned alongside silicones, but they are not the same thing.
- Silanes are small, monomeric silicon compounds. Typical organofunctional silanes have the structure R–Si–X₃, where X is a hydrolyzable group (such as methoxy, ethoxy or chloro) and R is an organic group.
- Silicones are polymers with a repeating Si–O–Si backbone.
The two are closely related. Chlorosilanes are the raw materials from which silicones are made. Organofunctional silanes are also widely used on their own as silane coupling agents: the hydrolyzable groups bond to inorganic surfaces (glass, minerals, metals, fillers), while the organic group (amino, epoxy, vinyl, methacryloxy, etc.) reacts with or entangles in the organic polymer. The result is a chemical bridge that improves adhesion and the performance of composites.

| Silanes | Silicones | |
|---|---|---|
| Molecular structure | Small molecule (monomer) | Polymer with Si–O–Si backbone |
| Main function | Coupling, crosslinking, surface treatment | Bulk material or additive with silicone properties |
| Typical use level | Low dosage, often as a primer or additive | Ranges from additive levels to the full material |
| Typical applications | Adhesion promoters, filler treatment, crosslinkers | Sealants, rubbers, fluids, coatings, release agents |
To choose the right silane for your system, see How to Select a Silane Coupling Agent and Amino vs. Epoxy Silanes, or browse LEGRA functional silanes.
6. Industrial applications of silicones
Silicones are used across almost every industry. Some of the most important areas:
- Coatings and inks – silicone additives improve flow, leveling, slip, defoaming and surface feel. Example: leather and synthetic leather coatings.
- Industrial release agents – low surface energy lets molded parts separate cleanly from molds. See our guide How to Choose a Mold Release Agent; example: external release for thermoplastic molding.
- Mineral and filler treatment – silicones and silanes make fillers such as silica hydrophobic and improve dispersion and reinforcement. Example: silica treatment for silicone rubber.
- Adhesives and sealants – silicone sealants and silane-modified systems provide durable, flexible bonds. See adhesives and sealants.
- Building and construction – silicone and silane water repellents protect masonry and concrete. See building and construction.
- Textiles – silicone softeners and finishes add a soft hand and water repellency. See textile and fabric treatment.
- Electronics and electrical – insulation, potting and protective materials. See electronics and electrical.

Explore all 16 application areas.
7. How to choose the right silicone product
Because silicones come in so many forms, selection starts with the application, not the product name. Consider:
- Application and function – what should the silicone do: lubricate, release, defoam, seal, coat, bond or treat a surface?
- Operating conditions – temperature range, outdoor exposure, contact with chemicals or moisture.
- Compatibility – with your resin system, solvent or water base, substrate and other additives. Poor compatibility can cause defects such as cratering or poor recoat adhesion.
- Physical form and processing – fluid, emulsion, paste or curable system, and how it fits your dosing, mixing and curing process.
- Curing method (for elastomers and resins) – heat, moisture, condensation or platinum addition cure, and any curing inhibitors present in your system.
- Regulatory requirements – food contact, cosmetic, medical or regional chemical regulations relevant to your market. See Quality & Documentation.
Need support? Our Product Selection and Sample Evaluation services help narrow the options. When standard grades do not meet your needs, see Custom Formulation.
8. Frequently asked questions
What are silicones made of?
Silicones are made from silicon, which is produced from quartz sand. The silicon is converted into chlorosilanes, which are then hydrolyzed and polymerized into siloxane polymers with organic side groups, usually methyl groups.
What is the difference between silicone and silicon?
Silicon is a chemical element. Silicone is a synthetic polymer typically made of silicon, oxygen, carbon and hydrogen. Silicon is used in electronics and solar cells; silicones are used in sealants, rubbers, lubricants, coatings and many other products.
Are silicones safe?
Silicones are generally considered low in toxicity and are widely used in personal care, food-contact and medical products when the appropriate grade is used. Certain cyclic siloxanes (D4, D5 and D6) are restricted in the EU under REACH (Regulation (EU) 2024/1328), with limits that apply to cosmetics and many consumer and professional products. Always check the current regulations for your market and application, and refer to the product Safety Data Sheet.
What is the difference between silicones and silanes?
Silanes are small monomeric molecules, often used as coupling agents, crosslinkers or surface treatments. Silicones are polymers with a repeating Si–O–Si backbone. Chlorosilanes are the starting materials used to make silicones.
Can silicones be custom formulated for a specific application?
Yes. Viscosity, functional groups, curing system, physical form and additive package can all be adjusted to meet specific performance, processing or regulatory requirements.
Choosing a silicone or silane for your application? Send your substrate, process and performance goals to info@landusil.com. Include known product codes when requesting Technical Data Sheets or samples.
