Skip to content
Browse by chemistry
Need help choosing?

Silicone fluids

What Is PDMS? Properties, Viscosity Grades and Uses

PDMS (polydimethylsiloxane) is the most widely used silicone fluid: a linear polymer of repeating –[Si(CH₃)₂–O]– units, usually capped at both ends with trimethylsiloxy groups. It combines thermal stability, low surface tension, low sensitivity of viscosity to temperature and good chemical inertness.

Published by LANDUSIL · Last updated November 2026

Close-up of a clear silicone fluid, representing the DUVERA silicone fluid family

PDMS appears in release agents, defoamers, lubricants, coatings, plastics processing and personal care. This guide explains what PDMS is, how viscosity grades differ, how PDMS compares with other silicone fluids, and how to choose a grade. If you are new to silicone chemistry, start with What Are Silicones?

Background video: silicone basics

This video is not specific to PDMS. It is an overview of the silicone family that PDMS belongs to: the Si–O backbone, the methyl side groups and the core properties that follow from them. If you are new to silicones, watch it first; if not, skip to the guide below.

What Are Silicones — LANDUSIL Silicone on YouTube. Open on YouTube

1. What PDMS is (and its other names)

PDMS is built from two kinds of structural units: D units, the repeating –Si(CH₃)₂–O– segment that forms the chain, and M units, trimethylsiloxy end groups that cap each end. A standard PDMS fluid can be written as M–Dₙ–M. The larger n is, the longer the chain, the higher the molecular weight and the higher the viscosity.

PDMS structure: M–Dₙ–MA trimethylsiloxy end group, a repeating dimethylsiloxane unit repeated n times, and a second trimethylsilyl end group.(CH₃)₃Si–O–M · end group[ Si(CH₃)₂–O ]ₙD · repeating unit — n sets chain length–Si(CH₃)₃M · end groupLonger chain (higher n) → higher molecular weight → higher viscosity
Standard PDMS: two M end groups and n repeating D units.

PDMS is sold under several names, which often causes confusion in specifications and enquiries:

NameWhere you will see it
Polydimethylsiloxane (PDMS)Technical and scientific literature
Dimethyl silicone fluid / oilIndustrial product catalogues
Silicone oil / silicone fluidGeneral trade use (may also include modified fluids)
DimethiconeCosmetic ingredient (INCI) name
DMSShorthand in some industries

“Silicone oil” is broader than PDMS: it can also refer to phenyl, amino or other modified silicone fluids. When ordering, always specify the chemistry, not just “silicone oil”.

2. How PDMS is made

PDMS starts from dimethyldichlorosilane, the main product of the direct (Müller–Rochow) process. Hydrolysis of this chlorosilane produces a mixture of cyclic siloxanes and short linear silanol-terminated chains. The cyclics are then polymerized by ring-opening polymerization with an acid or base catalyst, and an end-blocker such as hexamethyldisiloxane is added to control chain length and therefore viscosity. Finally, volatile low-molecular-weight species are reduced by stripping.

For the raw materials behind this process, see our UNARA silicone intermediates and cyclic siloxanes.

Material artwork representing UNARA silicone intermediates and raw materials

3. Viscosity grades: what the number tells you

Viscosity is the main way PDMS fluids are graded. Because all standard PDMS fluids share the same chemistry, viscosity is effectively a proxy for chain length.

PDMS viscosity scaleA scale from very low viscosity, water-thin grades to ultra-high viscosity gums. Longer chains give higher viscosity, lower volatility and lower migration.Very lowWater-thin, volatileLow–mediumFree-flowing oilHighThick, slow-flowingUltra-high / gumGum-likeLonger chains → higher viscosity, lower volatility and migration
Qualitative viscosity scale. Exact grade ranges are given on each product’s TDS.
Viscosity rangeTypical behaviorTypical uses
Very lowWater-thin, spreads quickly; the lowest grades are noticeably volatileCarriers, spreading agents, cosmetic and cleaning formulations
Low to mediumFree-flowing oilRelease agents, defoamer bases, polishes, coating additives, dielectric and damping fluids
HighThick, slow-flowing fluidLubricants, damping, additives where low migration is wanted
Ultra-high / gumVery viscous to gum-likePlastics processing additives, rubber compounding, base polymers
  • Units. PDMS viscosity is usually given as kinematic viscosity in cSt (mm²/s). Dynamic viscosity in mPa·s equals kinematic viscosity multiplied by density. Because the density of most PDMS grades is slightly below 1 g/cm³ (and noticeably lower for very low-viscosity grades), the two numbers are close but not identical—check which one a specification uses and the density on the TDS.
  • Blending. Intermediate viscosities can be produced by blending grades, but blends of very different molecular weights may behave differently from a single grade of the same viscosity, for example in volatility or migration.

For grade-specific data, see our dimethyl silicone fluids such as LANDUSIL DUVERA 1010-L, and request the Technical Data Sheet.

4. Key properties of PDMS

PropertyWhere it comes fromWhat it means in practice
Low change of viscosity with temperatureFlexible Si–O backboneMore consistent behavior across hot and cold conditions than many mineral oils
Remains fluid at low temperatureVery flexible chain, weak intermolecular forcesSuitable for cold-environment fluids and lubrication
Thermal and oxidative stabilityStrong Si–O bondsLong service life in heated applications within the grade’s limits
Low surface tensionMethyl groups at the surfaceExcellent spreading, wetting, defoaming and release
Water repellencyHydrophobic methyl surfaceMoisture protection and water-repellent finishes
Electrical insulationLow-polarity, low-moisture-uptake fluidDielectric and electronic applications
Chemical and physiological inertnessStable, unreactive structureSuitable grades are used in personal care, food-contact and medical applications

PDMS is insoluble in water. It dissolves in many non-polar solvents, such as aliphatic and aromatic hydrocarbons, but has limited solubility in polar solvents such as lower alcohols. This incompatibility with many organic systems is what makes PDMS effective as a defoamer and release agent—and why it must be dosed carefully in coatings, where excess can cause surface defects.

5. PDMS fluids vs crosslinked PDMS elastomers

The word “PDMS” is used for two very different materials:

  • PDMS fluids – linear, non-crosslinked chains. These are the silicone oils discussed in this guide.
  • Crosslinked PDMS – reactive PDMS chains (for example vinyl- or silanol-terminated) cured into a soft, transparent elastomer. This is the PDMS used to cast microfluidic chips and soft lithography molds.

If you are working with PDMS for microfluidic devices or micro-replication, see PDMS for Microfluidics and Microreplication.

6. PDMS vs other silicone fluids

PDMS is the reference point; other silicone fluids change the end groups or side groups to add reactivity or compatibility.

Fluid typeWhat changesTypical purpose
Standard PDMS (trimethylsiloxy-terminated)–Inert fluid: release, defoaming, lubrication, additives
Silanol (hydroxy)-terminated PDMSSi–OH end groupsReactive base polymer for condensation-cure systems, surface treatments
Vinyl-terminated / vinyl-functional fluidsSi–CH=CH₂ groupsBase polymers for addition-cure (platinum) silicones
Alkoxy-terminated PDMSSi–OR end groupsMoisture-reactive polymers and surface treatment, e.g. DUVERA 5090-L
Phenyl silicone fluidsSome methyl replaced by phenylHigher thermal stability, wider low-temperature range, better organic compatibility, higher refractive index
Amino-, polyether- and other modified fluidsOrganic functional groupsSoftening, compatibility, surface activity

See also Phenyl Silicone Fluid Manufacturing and the full DUVERA silicone fluid family.

7. Where PDMS is used

  • Mold release – low surface energy lets parts separate cleanly from molds. See our guide How to Choose a Mold Release Agent and Industrial Release Agents.
  • Foam control – PDMS, usually combined with hydrophobic silica, is a common base for silicone defoamers.
  • Coatings and inks – PDMS contributes slip, mar resistance and surface feel; modified (for example polyether-modified) siloxanes are more common for leveling and wetting. Dosage must be controlled, because excess PDMS can cause cratering. See Coatings & Inks.
  • Plastics and rubber processing – processing aids, internal lubricants and surface modifiers. See Rubber & Plastics.
  • Textiles – softening and finishing agents, often as emulsions. See Textile & Fabric Treatment.
  • Electrical and electronics – dielectric fluids and insulating applications. See Electronics & Electrical.
  • Mechanical fluids – damping and heat-transfer fluids that rely on stable viscosity across temperature.
  • Personal care – dimethicone provides a smooth, non-greasy feel in skin and hair products.

8. How to choose a PDMS grade

  1. Define the function. Release, defoaming, lubrication, slip, dielectric insulation or feel? The function narrows the viscosity range.
  2. Select viscosity. Lower grades spread faster and penetrate; higher grades migrate less and form more persistent films.
  3. Check temperature and volatility. For heated processes or vacuum, check volatile content and thermal limits on the TDS.
  4. Check compatibility. In coatings, plastics and formulations, PDMS can cause defects if incompatible. Consider modified fluids when better compatibility is needed.
  5. Choose the delivery form. Neat fluid, solution or emulsion—water-based systems usually need an emulsion.
  6. Confirm regulatory and purity requirements. Food-contact, cosmetic or medical uses, and limits on residual cyclic siloxanes (D4, D5, D6) in some markets.

Need help narrowing the options? Use our Product Selection service.

9. Frequently asked questions

Is PDMS the same as silicone oil?

Standard PDMS is the most common silicone oil, but “silicone oil” can also mean phenyl, amino or other modified silicone fluids. Specify “dimethyl silicone fluid” or “PDMS” with a viscosity grade to avoid confusion.

What is the difference between PDMS and dimethicone?

They are the same chemistry. Dimethicone is the INCI name used for PDMS in cosmetic and personal care ingredient lists.

Is PDMS safe?

PDMS is generally considered low in toxicity, and suitable grades are used in personal care, food-contact and medical products. Some regions restrict residual cyclic siloxanes (D4, D5 and D6) in certain products; see the FAQ in What Are Silicones? and always consult the product’s Safety Data Sheet.

Does PDMS dissolve in water?

No. PDMS is insoluble in water. It dissolves in many non-polar organic solvents. For water-based systems, PDMS is supplied as an emulsion.

How do I convert cSt to mPa·s?

Multiply kinematic viscosity (cSt) by density (g/cm³) to get dynamic viscosity (mPa·s). For most PDMS grades the result is close to, but slightly lower than, the cSt value. Use the density given on the product TDS.

Choosing a PDMS grade? Viscosity, purity and delivery form decide how PDMS performs in your process. Send your application details to info@landusil.com to request a Technical Data Sheet or a sample, or plan a trial through our Sample Evaluation service.

Request a Sample

Explore LANDUSIL