Browse by chemistry
Need help choosing?

Rubber & Plastics

Silicone Particles for Plastic Light Diffusion

Silicone particles for plastic light diffusion provide a dispersed phase that can redistribute light within a thermoplastic and alter its visual texture. Selecting the particle with the resin, thickness and lighting geometry helps diffuser developers balance transmitted light, scattering and appearance.

LANDUSIL supplies silicone resin micropowder for particle-based formulation studies. Relevant projects include PC or PMMA diffuser panels, molded lighting covers, translucent decorative parts and optical concentrates, with grade characterization and representative compound testing guiding selection.

Illuminated cube light fixture in workplace

What Silicone Particles for Plastic Light Diffusion Do

  • Provide a scattering phase. A dispersed particle and surrounding resin create an optical interface for light redistribution.
  • Offer bulk-diffusion development. Particle distribution and concentration give formulators variables for reducing visible source patterns.
  • Support surface-matting studies. A particle route can be evaluated for changes in surface appearance with a consistent mold finish.
  • Fit compound and concentrate routes. Direct dispersion or a compatible carrier can introduce the particles into the receiving polymer.
  • Connect appearance with geometry. Evaluating the actual section helps develop the optical effect where the part is used.

Typical Uses

  • Optical application: PC or PMMA diffuser panels

    What matters most

    Thickness, transmitted light and light redistribution

  • Optical application: Injection-molded lighting covers

    What matters most

    Wall transitions, flow-related appearance and local defects

  • Optical application: Backlight-development materials

    What matters most

    Source spacing, other optical layers and illuminated uniformity

  • Optical application: Translucent decorative parts

    What matters most

    Lit and unlit appearance, color and gloss

  • Optical application: Optical particle concentrates

    What matters most

    Compatible carrier, repeatable dosing and downstream dispersion

How to Select the Particle and Resin System

Start with the optical objective

A panel that conceals individual light sources and a decorative part with lower gloss require different measurements. Specify transmission, scattering, surface appearance and visible-defect limits in terms of the finished construction.

Use the actual resin grade, thickness profile and source arrangement. A flat plaque provides a useful reference for screening; the final panel or cover brings its own surface finish, mounting and viewing geometry.

Describe the dispersed phase

SIVERA 6010-P is a silicone-resin micropowder route. Particle chemistry, network, morphology and distribution determine how it behaves as a dispersed phase. Relate the measured refractive-index contrast to the actual resin, with the relevant measurement conditions identified.

Particle size, coarse material and agglomeration belong in the same selection record as concentration and thickness. Examine the distribution remaining after compounding and molding so the observed optical effect can be connected to the material in the part.

Develop uniform incorporation

For a concentrate, define carrier, active basis and final particle concentration. Check compatibility with the receiving resin and record compounding, filtration and forming history. High-Loading Mineral Masterbatches explains the two-stage concentrate and letdown task; optical particles add their own dispersion and appearance requirements.

Map sampling locations across sheet width and length or across a molded cover. Include gates, transitions and thicker regions where local optical behavior can differ. A consistent sampling plan helps compare formulations and production runs.

Application and Evaluation Guidelines

Obtain grade-specific particle characterization before specifying an optical-use material. Current evidence identifies the resin-micropowder role but does not establish optical-grade shape, particle distribution, refractive index, cleanliness or thermal behavior for the supplied grade. Request current TDS and SDS and develop these inputs with representative compound results.

Keep particle class clear. Silicone resin particles, silicone elastomer particles and hybrid particles have different structures. A film-forming resin or a powder-flow formulation is not an interchangeable diffuser particle. This page concerns thermoplastic diffusion; silicone materials used within LED packages are covered by LED & Optical Silicone Materials.

Optical measurementQuestion it answers
Luminous transmittanceHow much incident light passes through the specimen?
HazeWhat scattering is measured within the selected method?
Angular distributionWhere does the transmitted or reflected light go?
Illuminated uniformityHow visible are hotspots or brightness variation in the assembly?
Specular glossHow shiny is the surface under the defined geometry?
Color and visible defectsAre yellowing, specks or local cloudiness acceptable?

Higher haze alone does not establish useful diffusion, high transmission or lower gloss. Choose suitable methods for the optical range and part geometry, adding angle-resolved assessment where needed. Keep source conditions, specimen thickness and surface finish consistent across comparisons.

Evaluate the complete resin system after defined thermal, light, storage or cleaning exposure. Investigate moisture and matrix thermal history when bubbles or yellowing appear. Include mechanical integrity and downstream coating, printing or bonding where these affect acceptance. Confirm run-to-run repeatability, visible defects and local optical uniformity before scale-up.

Illuminated white panel in a blue frame

Frequently Asked Questions

How do silicone particles create diffusion in plastic?

The dispersed particles create optical interfaces with the surrounding resin. Their refractive-index relationship, size distribution, concentration and dispersion influence how light is redistributed through the actual thickness.

What is the difference between plastic haze and matting?

Haze describes scattering measured through a defined method. Matting concerns reduced surface gloss. A formulation can change them differently, so measure transmission, scattering and gloss according to the intended appearance.

What data should I request for a plastic diffuser particle?

Request identity, morphology, particle and coarse-tail distribution, refractive index and processing information. Then compare transmission, haze, illuminated uniformity, color and visible defects in your resin and section thickness.

LANDUSIL technical specialist in a lab coat holding a flask of liquid sample

Samples and Technical Support

LANDUSIL provides samples, TDS, SDS and selection support for particle-based plastic development. Please include:

  • Resin grade, part shape, thickness profile and surface finish
  • Light-source arrangement, viewing conditions and optical targets
  • Visible-defect limits, carrier route and compounding process
  • Thermal, light, cleaning and mechanical requirements
  • Estimated quantity, packaging preference and destination country