---
title: "What Is PDMS (Polydimethylsiloxane)? Properties, Viscosity Grades and Uses"
url: https://landusil.com/what-is-pdms/
description: "What is PDMS? Learn how polydimethylsiloxane is built, how viscosity grades differ, its key properties and where PDMS fluids are used."
author: "LANDUSIL Technical Team"
date_published: 2026-11-17T02:30:05+00:00
date_modified: 2026-11-17T02:38:30+00:00
language: en-US
type: post
generator: LemonX AEO 1.4.12
---

# What Is PDMS (Polydimethylsiloxane)? Properties, Viscosity Grades and Uses

Skip to content

Silanes & siliconesA LANDU brand

[!\[LANDUSIL\](https://landusil.com/site/assets/img/site/landu-logo.webp)](https://landusil.com/)

[Request a Sample](mailto:info@landusil.com?subject=Sample%20Request)

01 / Index

## Product families

8 families · 54 categories · 174 grades

[View all products](https://landusil.com/products/)

FamilyGrades

1. [01LEGRAFunctional Silanes59](https://landusil.com/products/functional-silanes-and-coupling-agents/)
2. [02ANCORISSilane Oligomers18](https://landusil.com/products/silane-oligomers-and-prehydrolysates/)
3. [03NOVERASilicone Resins26](https://landusil.com/products/silicone-resins-and-hybrid-binders/)
4. [04DUVERASilicone Fluids21](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/)
5. [05UNARAIntermediates & Catalysts22](https://landusil.com/products/silicone-intermediates-and-raw-materials/)
6. [06SIVERAFormulations & Additives15](https://landusil.com/products/silicone-formulations-and-additives/)
7. [07INCURARTV Crosslinkers7](https://landusil.com/products/rtv-silane-crosslinkers/)
8. [08LATERASurface Treatments6](https://landusil.com/products/other-coupling-agents-and-surface-treatments/)

![](https://landusil.com/site/assets/img/nav/legra-material-art-obsidian-v2-1536.webp)

*LEGRA — Coupling agents for adhesion and surface modification.*

Browse by chemistry

[Need help choosing?](https://landusil.com/services/product-selection/)

02 / Index

## Materials by industry

16 areas · 246 applications

[View all applications](https://landusil.com/applications/)

### Construction & surfaces

- [Building & Construction^21](https://landusil.com/applications/building-and-construction/)
- [Coatings & Inks^21](https://landusil.com/applications/coatings-and-inks/)
- [Artificial Stone & Engineered Quartz^8](https://landusil.com/applications/artificial-stone-and-engineered-quartz/)

### Polymers & bonding

- [Adhesives & Sealants^18](https://landusil.com/applications/adhesives-and-sealants/)
- [Composites & Glass Fiber^15](https://landusil.com/applications/composites-and-glass-fiber/)
- [Rubber & Plastics^21](https://landusil.com/applications/rubber-and-plastics/)
- [Wire & Cable Compounds^12](https://landusil.com/applications/wire-and-cable-compounds/)

### Industrial processing

- [Mineral & Filler Treatment^18](https://landusil.com/applications/mineral-and-filler-treatment/)
- [Metal Surface Treatment^9](https://landusil.com/applications/metal-surface-treatment/)
- [Foundry & Investment Casting^11](https://landusil.com/applications/foundry-and-investment-casting/)
- [Silicone Manufacturing^26](https://landusil.com/applications/silicone-manufacturing/)

### Specialty applications

- [Textile & Fabric Treatment^13](https://landusil.com/applications/textile-treatment/)
- [Agricultural Formulations^10](https://landusil.com/applications/agricultural-formulations/)
- [Photovoltaics^10](https://landusil.com/applications/photovoltaics/)
- [Electronics & Electrical^21](https://landusil.com/applications/electronics-electrical/)
- [Industrial Release Agents^12](https://landusil.com/applications/industrial-release-agents/)

Not listed?[Discuss your application with our team](mailto:info@landusil.com?subject=Technical%20Question)

03 / Index

## From selection to evaluation

From selection to evaluation, with your formulation at the centre.

[Services overview](https://landusil.com/services/)

### From selection to evaluation

- [**Product Selection**Find materials suited to your formulation and performance targets.](https://landusil.com/services/product-selection/)
- [**Application Support**Discuss compatibility, processing and application questions.](https://landusil.com/services/application-support/)

### Develop with us

- [**Sample Evaluation**Plan a sample evaluation for your formulation and process.](https://landusil.com/services/sample-evaluation/)
- [**Custom Formulation**Develop a formulation around your targets, from adjusted grades to new structures.](https://landusil.com/services/custom-formulation/)

04 / Index

## Support & resources

Product information, application guidance and practical answers for your next step.

[Resources overview](https://landusil.com/resources/)

### Product documentation

- [**Product Catalogs**Product families and material ranges.](https://landusil.com/resources/documentation/product-catalogs/)
- [**Technical Data Sheets (TDS)**Product properties and technical information.](https://landusil.com/resources/documentation/technical-data-sheets/)
- [**Safety Data Sheets (SDS)**Safety, handling and storage information.](https://landusil.com/resources/documentation/safety-data-sheets/)

### Knowledge

- [**Technical Guides**Guidance for material selection and use.](https://landusil.com/resources/technical-guides/)
- [**FAQ**Answers to common questions.](https://landusil.com/resources/faq/)

05 / Index

## About LANDUSIL

Functional silanes and specialty silicones, shaped around your application.

[Company overview](https://landusil.com/company/)

### About LANDUSIL

- [**Company Profile**Our identity, materials and application focus.](https://landusil.com/company/company-profile/)
- [**Purpose & Principles**The priorities that guide our work.](https://landusil.com/company/purpose-and-principles/)

### Materials & operations

- [**Manufacturing & Supply**Resins, adhesives, production and supply.](https://landusil.com/company/manufacturing-and-supply/)
- [**Research & Development**Connecting material chemistry with applications.](https://landusil.com/company/research-development/)
- [**Quality & Documentation**Specifications, batch information and documents.](https://landusil.com/company/quality-and-documentation/)

### Responsibility

- [**Product Stewardship**Product information for responsible material use.](https://landusil.com/company/product-stewardship/)
- [**Sustainability**Performance, resource use and practical priorities.](https://landusil.com/company/sustainability/)

### Connect

- [**Contact LANDUSIL**](mailto:info@landusil.com)
- [**Request A Quote**](mailto:info@landusil.com?subject=Quotation%20Request)
- [**Technical Inquiry**](mailto:info@landusil.com?subject=Technical%20Question)
- [**Distribution Inquiry**](mailto:info@landusil.com?subject=Distribution%20Inquiry)

Try

[!\[LANDUSIL\](https://landusil.com/site/assets/img/site/landu-logo.webp)](https://landusil.com/)

[info@landusil.com](mailto:info@landusil.com)

[Request a Quote](mailto:info@landusil.com?subject=Quotation%20Request)[Request a Sample](mailto:info@landusil.com?subject=Sample%20Request)

Silicone fluids

# What Is PDMS? Properties, Viscosity Grades and Uses

**PDMS (polydimethylsiloxane) is the most widely used silicone fluid: a linear polymer of repeating –[Si(CH₃)₂–O]– units, usually capped at both ends with trimethylsiloxy groups.** It combines thermal stability, low surface tension, low sensitivity of viscosity to temperature and good chemical inertness.

Published by LANDUSIL · Last updated November 2026

Compare viscosity gradesRequest a TDS or sample

![Close-up of a clear silicone fluid, representing the DUVERA silicone fluid family](https://landusil.com/site/assets/img/nav/duvera-fluid-detail.webp)

PDMS appears in release agents, defoamers, lubricants, coatings, plastics processing and personal care. This guide explains what PDMS is, how viscosity grades differ, how PDMS compares with other silicone fluids, and how to choose a grade. If you are new to silicone chemistry, start with [What Are Silicones?](https://landusil.com/resources/technical-guides/what-are-silicones/)

## Background video: silicone basics

This video is not specific to PDMS. It is an overview of the silicone family that PDMS belongs to: the Si–O backbone, the methyl side groups and the core properties that follow from them. If you are new to silicones, watch it first; if not, skip to the guide below.

[Embedded content](https://www.youtube.com/embed/3T_CG1T8V08)

*What Are Silicones — LANDUSIL Silicone on YouTube. [Open on YouTube](https://www.youtube.com/watch?v=3T_CG1T8V08)*

## 1. What PDMS is (and its other names)

PDMS is built from two kinds of structural units: **D units**, the repeating –Si(CH₃)₂–O– segment that forms the chain, and **M units**, trimethylsiloxy end groups that cap each end. A standard PDMS fluid can be written as **M–Dₙ–M**. The larger *n* is, the longer the chain, the higher the molecular weight and the higher the viscosity.

*Standard PDMS: two M end groups and n repeating D units.*

PDMS is sold under several names, which often causes confusion in specifications and enquiries:

| Name | Where you will see it |
| --- | --- |
| Polydimethylsiloxane (PDMS) | Technical and scientific literature |
| Dimethyl silicone fluid / oil | Industrial product catalogues |
| Silicone oil / silicone fluid | General trade use (may also include modified fluids) |
| Dimethicone | Cosmetic ingredient (INCI) name |
| DMS | Shorthand in some industries |

“Silicone oil” is broader than PDMS: it can also refer to phenyl, amino or other modified silicone fluids. When ordering, always specify the chemistry, not just “silicone oil”.

## 2. How PDMS is made

PDMS starts from dimethyldichlorosilane, the main product of the direct (Müller–Rochow) process. Hydrolysis of this chlorosilane produces a mixture of cyclic siloxanes and short linear silanol-terminated chains. The cyclics are then polymerized by ring-opening polymerization with an acid or base catalyst, and an end-blocker such as hexamethyldisiloxane is added to control chain length and therefore viscosity. Finally, volatile low-molecular-weight species are reduced by stripping.

For the raw materials behind this process, see our [UNARA silicone intermediates](https://landusil.com/products/silicone-intermediates-and-raw-materials/) and [cyclic siloxanes](https://landusil.com/products/silicone-intermediates-and-raw-materials/cyclic-siloxanes/).

![Material artwork representing UNARA silicone intermediates and raw materials](https://landusil.com/site/assets/img/nav/unara-defined-material.webp)

## 3. Viscosity grades: what the number tells you

Viscosity is the main way PDMS fluids are graded. Because all standard PDMS fluids share the same chemistry, viscosity is effectively a proxy for chain length.

*Qualitative viscosity scale. Exact grade ranges are given on each product’s TDS.*

| Viscosity range | Typical behavior | Typical uses |
| --- | --- | --- |
| Very low | Water-thin, spreads quickly; the lowest grades are noticeably volatile | Carriers, spreading agents, cosmetic and cleaning formulations |
| Low to medium | Free-flowing oil | Release agents, defoamer bases, polishes, coating additives, dielectric and damping fluids |
| High | Thick, slow-flowing fluid | Lubricants, damping, additives where low migration is wanted |
| Ultra-high / gum | Very viscous to gum-like | Plastics processing additives, rubber compounding, base polymers |

- **Units.** PDMS viscosity is usually given as kinematic viscosity in cSt (mm²/s). Dynamic viscosity in mPa·s equals kinematic viscosity multiplied by density. Because the density of most PDMS grades is slightly below 1 g/cm³ (and noticeably lower for very low-viscosity grades), the two numbers are close but not identical—check which one a specification uses and the density on the TDS.
- **Blending.** Intermediate viscosities can be produced by blending grades, but blends of very different molecular weights may behave differently from a single grade of the same viscosity, for example in volatility or migration.

For grade-specific data, see our [dimethyl silicone fluids](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/dimethyl-silicone-fluids/) such as [LANDUSIL DUVERA 1010-L](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/dimethyl-silicone-fluids/landusil-duvera-1010-l/), and request the [Technical Data Sheet](https://landusil.com/resources/documentation/technical-data-sheets/).

## 4. Key properties of PDMS

| Property | Where it comes from | What it means in practice |
| --- | --- | --- |
| Low change of viscosity with temperature | Flexible Si–O backbone | More consistent behavior across hot and cold conditions than many mineral oils |
| Remains fluid at low temperature | Very flexible chain, weak intermolecular forces | Suitable for cold-environment fluids and lubrication |
| Thermal and oxidative stability | Strong Si–O bonds | Long service life in heated applications within the grade’s limits |
| Low surface tension | Methyl groups at the surface | Excellent spreading, wetting, defoaming and release |
| Water repellency | Hydrophobic methyl surface | Moisture protection and water-repellent finishes |
| Electrical insulation | Low-polarity, low-moisture-uptake fluid | Dielectric and electronic applications |
| Chemical and physiological inertness | Stable, unreactive structure | Suitable grades are used in personal care, food-contact and medical applications |

PDMS is insoluble in water. It dissolves in many non-polar solvents, such as aliphatic and aromatic hydrocarbons, but has limited solubility in polar solvents such as lower alcohols. This incompatibility with many organic systems is what makes PDMS effective as a defoamer and release agent—and why it must be dosed carefully in coatings, where excess can cause surface defects.

## 5. PDMS fluids vs crosslinked PDMS elastomers

The word “PDMS” is used for two very different materials:

- **PDMS fluids** – linear, non-crosslinked chains. These are the silicone oils discussed in this guide.
- **Crosslinked PDMS** – reactive PDMS chains (for example vinyl- or silanol-terminated) cured into a soft, transparent elastomer. This is the PDMS used to cast microfluidic chips and soft lithography molds.

If you are working with PDMS for microfluidic devices or micro-replication, see [PDMS for Microfluidics and Microreplication](https://landusil.com/applications/electronics-electrical/pdms-microfluidic-microreplication/).

## 6. PDMS vs other silicone fluids

PDMS is the reference point; other silicone fluids change the end groups or side groups to add reactivity or compatibility.

| Fluid type | What changes | Typical purpose |
| --- | --- | --- |
| Standard PDMS (trimethylsiloxy-terminated) | – | Inert fluid: release, defoaming, lubrication, additives |
| Silanol (hydroxy)-terminated PDMS | Si–OH end groups | Reactive base polymer for condensation-cure systems, surface treatments |
| Vinyl-terminated / vinyl-functional fluids | Si–CH=CH₂ groups | Base polymers for addition-cure (platinum) silicones |
| Alkoxy-terminated PDMS | Si–OR end groups | Moisture-reactive polymers and surface treatment, e.g. [DUVERA 5090-L](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/reactive-end-functional-polysiloxanes/landusil-duvera-5090-l/) |
| Phenyl silicone fluids | Some methyl replaced by phenyl | Higher thermal stability, wider low-temperature range, better organic compatibility, higher refractive index |
| Amino-, polyether- and other modified fluids | Organic functional groups | Softening, compatibility, surface activity |

See also [Phenyl Silicone Fluid Manufacturing](https://landusil.com/applications/silicone-manufacturing/phenyl-silicone-fluid-manufacturing/) and the full [DUVERA silicone fluid family](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/).

## 7. Where PDMS is used

- **Mold release** – low surface energy lets parts separate cleanly from molds. See our guide [How to Choose a Mold Release Agent](https://landusil.com/how-to-choose-a-mold-release-agent/) and [Industrial Release Agents](https://landusil.com/applications/industrial-release-agents/).
- **Foam control** – PDMS, usually combined with hydrophobic silica, is a common base for silicone defoamers.
- **Coatings and inks** – PDMS contributes slip, mar resistance and surface feel; modified (for example polyether-modified) siloxanes are more common for leveling and wetting. Dosage must be controlled, because excess PDMS can cause cratering. See [Coatings & Inks](https://landusil.com/applications/coatings-and-inks/).
- **Plastics and rubber processing** – processing aids, internal lubricants and surface modifiers. See [Rubber & Plastics](https://landusil.com/applications/rubber-and-plastics/).
- **Textiles** – softening and finishing agents, often as emulsions. See [Textile & Fabric Treatment](https://landusil.com/applications/textile-treatment/).
- **Electrical and electronics** – dielectric fluids and insulating applications. See [Electronics & Electrical](https://landusil.com/applications/electronics-electrical/).
- **Mechanical fluids** – damping and heat-transfer fluids that rely on stable viscosity across temperature.
- **Personal care** – dimethicone provides a smooth, non-greasy feel in skin and hair products.

## 8. How to choose a PDMS grade

1. **Define the function.** Release, defoaming, lubrication, slip, dielectric insulation or feel? The function narrows the viscosity range.
2. **Select viscosity.** Lower grades spread faster and penetrate; higher grades migrate less and form more persistent films.
3. **Check temperature and volatility.** For heated processes or vacuum, check volatile content and thermal limits on the TDS.
4. **Check compatibility.** In coatings, plastics and formulations, PDMS can cause defects if incompatible. Consider modified fluids when better compatibility is needed.
5. **Choose the delivery form.** Neat fluid, solution or emulsion—water-based systems usually need an emulsion.
6. **Confirm regulatory and purity requirements.** Food-contact, cosmetic or medical uses, and limits on residual cyclic siloxanes (D4, D5, D6) in some markets.

Need help narrowing the options? Use our [Product Selection](https://landusil.com/services/product-selection/) service.

## 9. Frequently asked questions

**Is PDMS the same as silicone oil?**

Standard PDMS is the most common silicone oil, but “silicone oil” can also mean phenyl, amino or other modified silicone fluids. Specify “dimethyl silicone fluid” or “PDMS” with a viscosity grade to avoid confusion.

**What is the difference between PDMS and dimethicone?**

They are the same chemistry. Dimethicone is the INCI name used for PDMS in cosmetic and personal care ingredient lists.

**Is PDMS safe?**

PDMS is generally considered low in toxicity, and suitable grades are used in personal care, food-contact and medical products. Some regions restrict residual cyclic siloxanes (D4, D5 and D6) in certain products; see the FAQ in [What Are Silicones?](https://landusil.com/resources/technical-guides/what-are-silicones/) and always consult the product’s [Safety Data Sheet](https://landusil.com/resources/documentation/safety-data-sheets/).

**Does PDMS dissolve in water?**

No. PDMS is insoluble in water. It dissolves in many non-polar organic solvents. For water-based systems, PDMS is supplied as an emulsion.

**How do I convert cSt to mPa·s?**

Multiply kinematic viscosity (cSt) by density (g/cm³) to get dynamic viscosity (mPa·s). For most PDMS grades the result is close to, but slightly lower than, the cSt value. Use the density given on the product TDS.

**Choosing a PDMS grade?** Viscosity, purity and delivery form decide how PDMS performs in your process. Send your application details to [info@landusil.com](mailto:info@landusil.com?subject=PDMS%20Fluid%20Enquiry) to request a Technical Data Sheet or a sample, or plan a trial through our [Sample Evaluation](https://landusil.com/services/sample-evaluation/) service.

[Request a Sample](mailto:info@landusil.com?subject=PDMS%20Sample%20Request)

**Related resources:** [What Are Silicones?](https://landusil.com/resources/technical-guides/what-are-silicones/) · [Dimethyl Silicone Fluids](https://landusil.com/products/silicone-fluids-and-functional-polysiloxanes/dimethyl-silicone-fluids/) · [Technical Data Sheets](https://landusil.com/resources/documentation/technical-data-sheets/)

Let’s talk materials

## From the bonds inside a formulation to the surfaces around us.

Start with your substrate, process and performance goals. Together, we can discuss the next step in your evaluation.

[Request a Sample](mailto:info@landusil.com?subject=Sample%20Request)[Talk to our team](mailto:info@landusil.com?subject=Technical%20Question)

![](https://landusil.com/site/home/assets/material-art-obsidian-v2-768.webp)

[!\[LANDUSIL\](https://landusil.com/site/assets/img/site/landu-logo.webp)](https://landusil.com/)

Silane & silicone materials.

High-Tech Development Zone, Shizhong Subdistrict
Yucheng, Shandong, China

[info@landusil.com](mailto:info@landusil.com)

© 2026 Shandong Landu Biomaterials Co., Ltd. · Yucheng, Shandong, China

## Explore LANDUSIL

## FAQ

### Is PDMS the same as silicone oil?

Standard PDMS is the most common silicone oil, but silicone oil can also mean phenyl, amino or other modified silicone fluids. Specify dimethyl silicone fluid or PDMS with a viscosity grade to avoid confusion.

### What is the difference between PDMS and dimethicone?

They are the same chemistry. Dimethicone is the INCI name used for PDMS in cosmetic and personal care ingredient lists.

### Is PDMS safe?

PDMS is generally considered low in toxicity, and suitable grades are used in personal care, food-contact and medical products. Some regions restrict residual cyclic siloxanes (D4, D5 and D6) in certain products; always consult the product Safety Data Sheet.

### Does PDMS dissolve in water?

No. PDMS is insoluble in water. It dissolves in many non-polar organic solvents. For water-based systems, PDMS is supplied as an emulsion.

### How do I convert cSt to mPa·s?

Multiply kinematic viscosity (cSt) by density (g/cm³) to get dynamic viscosity (mPa·s). For most PDMS grades the result is close to, but slightly lower than, the cSt value. Use the density given on the product TDS.
