Browse by chemistry
Need help choosing?

Wire & Cable Compounds

Silicone Materials for Cable Extrusion

A silicone wire compound needs controlled flow, shape retention before cure and a consistent network around the conductor. Silicone materials for cable extrusion provide reactive polymer and resin options for developing that balance. Selecting their functionality and supply form helps you connect formulation changes with coating uniformity, flexibility and heat-aging performance.

LANDUSIL supplies silicone polymer and resin ingredients for compound-development teams. Begin with your extrusion-grade base gum, reinforcing silica and chosen cure system. We help you select components for a defined modifier, reinforcement or reaction role, then evaluate them within the complete silicone wire insulation formulation.

Electrical wires in red blue black and white

What Silicone Materials for Cable Extrusion Do

  • Provide reactive polymer functionality. Vinyl-containing polysiloxanes offer terminal or pendant reaction sites for designed cure systems.
  • Support reaction-balance development. A specified Si–H component supplies a crosslinking function in a matched platinum addition cure.
  • Add a resinous formulation option. Vinyl MQ resin can be studied for its contribution to reinforcement and network structure.
  • Help adjust compound behavior. Polymer and resin choices influence incorporation, flow, uncured shape retention and the final mechanical balance.
  • Connect formulation with conductor coating. Trials can address thin-wall consistency, cure timing, tear and thermal-aging retention together.

Typical Uses

  • End use or process: Heat-exposed equipment-wire insulation

    What matters most

    Cure history, conductor interaction and mechanical and electrical retention

  • End use or process: Flexible silicone cables

    What matters most

    Tear, bending response, wall thickness and stripping or adhesion

  • End use or process: Automotive cable formulation development

    What matters most

    Defined electrical, thermal and environmental requirements

  • End use or process: Thin-wall conductor coating

    What matters most

    Concentricity, minimum wall, inclusions and electrical defect detection

  • End use or process: Peroxide or addition-cure extrusion

    What matters most

    The matched cure package, processing time and actual thermal history

How to Select the Polymer and Resin Components

Start with extrusion shape retention

Define the base gum, reinforcing silica and proposed modifier role. Obtain molecular or viscosity information appropriate to each component and confirm its supplied form. Compare feeding, shear response and die behavior in the complete compound, including the interval before vulcanization.

Use representative conductor preparation and alignment. For thin-wall work, track the local minimum thickness as well as the outer surface. Startup, steady running and restart samples can reveal different feeding or cure effects.

Count the actual reaction sites

In a platinum-addition formulation, include vinyl and Si–H contributions from every reactive component. DUVERA 7010-L contributes terminal and pendant vinyl sites; DUVERA 7020-L has pendant vinyl with trimethylsiloxy ends. Establish the actual equivalents for each grade and include a reactive resin's contribution in the balance.

Confirm catalyst, inhibitor and contact-material compatibility. Review pigments, treated silica and equipment residues in the same formulation. Manage water and silanol-containing species when working with Si–H components, and assess any gas formation under the actual mixing and cure conditions.

Match reinforcement and cure to the cable

Compare resin incorporation with hardness, tear and bending requirements. For silica, record surface treatment, loading, moisture and retained treatment species. Upstream treatment needs its own preparation and residue-control step before incorporation; see silica treatment for silicone rubber.

For peroxide extrusion, select the curing package for the continuous vulcanization process and examine premature reaction during feeding. For addition curing, set reaction balance and cure timing around the chosen base. Record initial cure and any post-treatment with each sample series.

Application and Evaluation Guidelines

Use the established extrusion compound as the reference and change one polymer, resin or filler-treatment factor at a time. Document necessary adjustments to reactive input. Compare uncured shape retention, pressure, surface, cure and stored-compound behavior under consistent conductor and line conditions.

The listed liquid polymers and resins are formulation ingredients, not extrusion-grade HCR base gums or ready-to-extrude cable compounds. A Si–H component supplies a reaction function rather than a platinum catalyst. Confirm the actual structure, functionality and carrier before fixing the formulation.

Inspect particles, bubbles and prematurely cured material alongside dimensional uniformity and spark-test response. Spark testing detects specified insulation defects; it does not establish breakdown strength or the complete cable rating. Include the required dielectric measurements and silicone cable heat aging in the acceptance plan.

For flexible cables, test tear, bending and stripping or adhesion after conditioning. For equipment or automotive wire, use the intended construction and required electrical, thermal and environmental program. A short heat exposure cannot assign a continuous operating-temperature class. Peroxide and addition-cure formulations each need their own production-window evaluation.

Bundle of wires on a speckled grey surface

Frequently Asked Questions

Which silicone polymer is useful for cable-compound development?

A vinyl-functional polysiloxane can supply a reactive component when its molecular characteristics suit the base compound. Confirm actual functionality, viscosity and the complete cure design, then compare coating flow and uncured shape retention.

How do terminal and pendant vinyl groups affect formulation?

Both can contribute reaction sites. Count all vinyl-bearing components in the cure balance and compare their distribution through the network. Trimethylsiloxy end groups have a different function from vinyl end groups.

What should I check for thin-wall silicone wire coating?

Check feed consistency, conductor alignment, minimum wall thickness, inclusions and bubbles across startup and normal running. Use dimensional inspection and the specified electrical defect detection together with surface examination.

How are peroxide and platinum-addition cable compounds selected?

Choose around the base gum, line and intended cure sequence. Peroxide systems require their matched curing package; addition systems require vinyl/Si–H balance, catalyst compatibility and controlled cure timing. Evaluate residuals and post-treatment for the actual formulation.

LANDUSIL technical specialist in a lab coat holding a document folder

Samples and Technical Support

LANDUSIL provides polymer and resin samples, TDS, SDS and selection support for silicone cable development. Please include:

  • Extrusion-grade base gum, silica and current filler treatment
  • Proposed component role, cure route and reactive-group information
  • Conductor finish, wall thickness, extrusion and post-treatment sequence
  • Current surface or electrical defects and thermal-aging requirements
  • Estimated quantity, packaging preference and destination country