
Applications
Silane and Silicone Applications by Industry
Silanes and silicones solve very different problems depending on where they enter your process: a coupling agent bonds glass fiber to resin, an alkyl silane keeps water out of concrete, a silicone fluid releases a part from its mold, and a resin binder keeps a coating intact at high temperature. This overview of silane and silicone applications helps you find the right starting point for your industry.
LANDUSIL supplies 174 grades in 8 product series: functional silanes, silane oligomers, silicone resins, silicone fluids, intermediates and catalysts, ready-to-use formulations, RTV crosslinkers and other surface treatments. Choose your industry below to see typical uses, recommended grades and selection advice.
Explore by Industry
| Industry | What our materials do |
|---|---|
| Building & Construction | Water repellents for concrete, masonry, mortar and gypsum; silanes and polymers for construction sealants, adhesives and insulation |
| Coatings & Inks | Silicone resin binders for heat-resistant and protective coatings, adhesion promoters, hardcoat precursors and surface-control additives |
| Adhesives & Sealants | Base polymers, crosslinkers and adhesion promoters for RTV silicones, silane-modified polymers, epoxies and pressure-sensitive adhesives |
| Composites & Glass Fiber | Silane coupling agents for glass-fiber sizing and fabric finishing, and interface modification in UP, vinyl ester and epoxy composites |
| Artificial Stone & Engineered Quartz | Coupling agents that bond quartz and mineral fillers to unsaturated polyester, acrylic and epoxy binders |
| Rubber & Plastics | Silanes for silica-filled tire and rubber compounds, mineral-filled plastics, crosslinkable polyethylene and silicone rubber |
| Mineral & Filler Treatment | Surface treatment of pigments, silica, quartz, ATH, MDH and other fillers for hydrophobicity, dispersion and resin coupling |
| Metal Surface Treatment | Silane adhesion promoters and pretreatment ingredients for coated and bonded steel, aluminum, zinc and copper |
| Wire & Cable Compounds | Vinyl silanes for moisture-cure crosslinking and silanes for treated flame-retardant fillers in HFFR compounds |
| Foundry & Investment Casting | Silanes for resin-bonded sand, silicate binders for investment-casting shells, and release materials |
| Textile & Fabric Treatment | Amino and functional silicone fluids for softening, thread lubrication, coated fabrics and water-repellent finishes |
| Agricultural Formulations | Trisiloxane wetting agents, silicone defoamers and auxiliaries for seed treatment and fertilizer coating |
| Silicone Manufacturing | Cyclics, end-cappers, chlorosilanes, silicates, catalysts and reactive siloxanes for silicone polymer and resin production |
| Photovoltaics | Silane coupling agents for encapsulants and glass, and silicone materials for module sealing and junction-box potting |
| Electronics & Electrical | Silicone fluids, resins and silanes for potting, conformal coating, thermal interface materials and insulation |
| Industrial Release Agents | Silicone fluids, emulsions and reactive siloxanes for external and internal mold release, including tire bladder lubricants |
How to Find the Right Material
Three questions narrow down the choice quickly:
- Where does the ingredient enter your process? A filler pretreatment, an addition to the resin or mortar, a surface treatment of the finished part and a synthesis step each call for different grades and supply forms.
- What should it change? Adhesion, water repellency, crosslinking, release, dispersion, wetting or heat resistance: each goal points to a different chemistry.
- What must stay unchanged? Cure speed, viscosity, appearance, paintability or storage stability often decide between two otherwise suitable grades.
Our application pages answer these questions for each industry and link directly to the recommended LANDUSIL grades.
Frequently Asked Questions
What are silanes used for in industry?
Silanes are mainly used as coupling agents between inorganic materials (glass, minerals, metals) and organic polymers, as crosslinkers for moisture-curing systems, and as water-repellent actives for mineral building materials.
What is the difference between a silane and a silicone?
A silane is a monomer with one silicon atom, usually carrying reactive alkoxy groups. Silicones (polysiloxanes) are polymers with a repeating Si–O backbone, supplied as fluids, resins, elastomer bases or emulsions.
Can one grade be used in several industries?
Yes, many silanes serve several industries. The correct grade, dosage and addition point still need to be confirmed in each formulation, so we recommend a trial for every new application.
Samples and Technical Support
LANDUSIL provides samples, TDS and SDS for its grades and helps you shortlist candidates for your process. When you contact us, please include the material you manufacture, the substrate or receiving system, the process step where the ingredient is added, your target performance, estimated volume and destination country.

