Browse by chemistry
Need help choosing?
Circuit board close-up green and gold technology

Electronics & Electrical

Silicone Raw Materials for Electronics

Electronic assemblies need materials that fit the space, the contacting surfaces and the manufacturing sequence. Silicone raw materials for electronics let formulators build compliant potting networks, protective films, filled thermal interfaces and insulating constructions around those requirements.

LANDUSIL supplies reactive polysiloxanes, silicone resins, functional silanes and intermediates for electronic material development. Start with the function you need, then choose the polymer, binder or surface treatment that enters the right process step. The application pages below connect that task to specific ingredients and practical evaluation work.

Extreme closeup of integrated circuit board

Who We Supply

  • Electronic encapsulant developers designing soft gels or elastomeric potting compounds for power modules, sensors and component assemblies.
  • PCB coating manufacturers balancing thin coverage, board adhesion, selective application and access for repair.
  • Electrical adhesive formulators matching glass, ceramic, metal oxide and filled resin interfaces to their cure chemistry.
  • Thermal material producers managing high filler loading, dispensing, contact thickness and stability in pads, gap fillers and greases.
  • Electrical insulation manufacturers developing mica binders, winding varnishes and liquid media around their complete insulation construction.
  • Optical and microdevice developers studying transparent networks, functional surface layers and controlled precursor processes.

Applications for Silicone Raw Materials for Electronics

Transparent encapsulation and bonding

Optical materials require attention to the whole light path, including thickness, neighboring coatings and the cured interface. Methyl and phenyl silicone ingredients support different formulations.

Key LANDUSIL Product Families for Electronics

The following grades illustrate the main ingredient roles across these applications. Each linked detail page gives a more focused shortlist for its manufacturing task.

Product or grade groupChemistryRole
DUVERA 5020-LVinyl-terminated PDMSBase polymer for a matched addition-cure formulation
NOVERA 3010-LVinyl MQ silicone resinReactive resin component for adjusting network behavior
DUVERA 5060-LSilanol-terminated PDMSBase polymer for condensation-cure development
NOVERA 2010-SSolid methyl phenyl silicone resinBinder ingredient for mica and electrical insulation constructions
NOVERA 4010-LEpoxy polysiloxane resinBinder component for protective coating development
LEGRA 2010-LGlycidoxy epoxy silane with ethoxy groupsInterface treatment for compatible resins and inorganic surfaces
LEGRA 4011-LMethacryloxy silane with methoxy groupsCoupling ingredient for compatible radical-curing resins
DUVERA 1010-LDimethyl silicone fluidBase fluid for non-curing compounds and dielectric fluid studies
Close-up of copper wire electrical motor component

How LANDUSIL Supports Your Development

LANDUSIL offers 174 grades across 8 product series, with samples, TDS, SDS and technical selection support. Packaging options extend from 25 kg containers to IBCs, according to the material and supply form. A useful selection brief connects the ingredient to the process where it will enter your formulation.

For addition-cure materials, establish the vinyl and Si–H balance together with a matched catalyst and contact-material compatibility. For condensation systems, review moisture access, reaction products and cure through the actual assembly. For filled materials, carry powder treatment through to measurements on the finished compound and its assembled interface.

Evaluation priorities

Agree on the required electrical, thermal, optical and environmental measurements before comparing grades. Check ions, volatiles, particles and relevant impurities against your process specification. General chemical identity does not establish electronic purity, equipment qualification or finished-device performance. Keep semiconductor surface processing, cured insulation and liquid dielectric evaluation tied to their own methods and constructions.

Frequently Asked Questions

Which silicone ingredients are used in electronic potting?

Addition-cure formulations combine a vinyl-functional polymer, a Si–H component and a matched catalyst. Condensation formulations use silanol or hydrolyzable polymer chemistry with the appropriate crosslinker and catalyst. Fillers and adhesion ingredients complete the formulation around the assembly requirements.

How do I choose between a thermal pad and thermal grease?

A pad or cured gap filler uses a polymer network to retain its form and conform under assembly pressure. A grease uses a non-curing fluid and powder structure. Compare gap geometry, dispensing, contact pressure and stability through cycling.

Which silane functional group suits an electronic adhesive?

Epoxy silanes suit compatible epoxy and interface reactions; amino silanes provide amine reactivity; methacryloxy silanes suit compatible radical-curing resins. Select the group with the adhesive cure and substrate treatment route in view.

What should I send for material selection?

Provide the receiving polymer, contacting materials, process step, geometry and target function. Add your test methods and purity requirements so the shortlist addresses the actual construction.

Samples and Technical Support

LANDUSIL provides samples, TDS, SDS and selection support for formulation and process trials. Include:

  • The material you manufacture and its intended electronic or electrical function
  • Polymer or resin, filler type and contacting substrates
  • Mixing, coating, dispensing, molding or surface-treatment process
  • Electrical, thermal, optical and environmental evaluation requirements
  • Estimated volume, packaging preference and destination country