Browse by chemistry
Need help choosing?
LATERA surface treatments: material close-up

LATERA

Other Coupling Agents and Surface Treatments

Titanate, aluminate, zirconate and phosphate coupling agents for filler and pigment treatment.

6 grades4 categories

Silanes are not the only way to connect a powder to a resin. Other coupling agents and surface treatments offer non-silane routes for mineral fillers and pigments, particularly where a surface or binder does not suit silane chemistry or where you want to compare alternatives.

The LATERA series includes 6 grades: three organotitanates, an aluminate, a zirconate and a phosphate surface-treatment agent. Formulators evaluate them in powder pretreatment and in resin-phase, milling and dispersion routes.

How to Choose Other Coupling Agents and Surface Treatments

Identify the powder surface

Fillers and pigments differ in surface chemistry, moisture and particle size. Characterize the powder first, because the treatment needs a surface it can act on.

Choose a treatment route

Controlled powder pretreatment and direct addition during milling or resin mixing are different processes. Compare both when your equipment allows it, as the treatment level and distribution can change.

Compare dispersion and final properties

Evaluate viscosity and dispersion in the receiving resin, then check the properties of the finished material. Use an untreated control so that you can see the actual effect of the treatment.

Choose the chemistry to compare

Fatty-acid and pyrophosphato titanates provide different ligand structures for powder interfaces. Aluminate, zirconate and phosphate grades give further routes, and each is a formulated material, so use its current TDS and SDS when you plan a trial.

Keep the treatment level measurable

Record how much agent you add and how you distribute it. A consistent procedure makes it possible to compare chemistries fairly and to repeat a good result at a larger scale.

Frequently Asked Questions

What is the difference between a titanate and a silane coupling agent?

Both work at the interface between a powder and an organic phase, but they use different central elements and reactive groups. Titanates are often evaluated alongside silanes when you are working with fillers and pigments.

Can these agents be added directly to the resin?

Some routes use compatible resin-phase or milling addition instead of powder pretreatment. Check the current TDS and compare the routes in your own system.

Which materials are these treatments used on?

They are intended for developing mineral and pigment interfaces. Selection depends on the powder's surface and the receiving resin, so a trial is recommended for each new combination.

Do I need to pretreat the powder?

Not always. Pretreatment gives direct control over the powder, while resin-phase or milling addition can fit an existing process. Compare both if your equipment allows it.

Are these grades single substances?

Some are named chemical substances, such as the three titanates with listed CAS numbers. The aluminate, zirconate and phosphate grades are formulated materials, so their identity is documented in the SDS.

LANDUSIL technical specialist seated at a desk presenting a flask of liquid sample

Samples and Technical Support

LANDUSIL provides samples, TDS and SDS for the grades on this page and can help you shortlist candidates. When you contact us, please include your filler or pigment, the receiving resin, your treatment or milling route, estimated volume and destination country.