Browse by chemistry
Need help choosing?
ANCORIS silane oligomers: material close-up

ANCORIS

Silane Oligomers and Prehydrolysates

Oligomeric, prehydrolyzed and waterborne silane systems, plus functional POSS for low-VOC and hybrid formulations.

18 grades7 categories

Monomeric silanes are not always easy to use: some processes need a waterborne route, others need a different viscosity or lower volatility. Silane oligomers and prehydrolysates give you these options by supplying silane chemistry in a partly condensed or already hydrolyzed form.

The ANCORIS series includes 18 grades: liquid oligomers, aqueous hydrolysates, a waterborne blend and five functional POSS materials. They are used in fiber sizes and fabric finishes, mineral treatments, water repellents, primers, coatings and resin modification.

How to Choose Silane Oligomers and Prehydrolysates

Start with the organic function

Amino, epoxy, vinyl and methacryloxy systems follow the same logic as their monomer equivalents: choose the organic group that suits your resin or polymer. Alkyl oligomers are the route for water-repellent treatment of porous mineral surfaces.

Choose between waterborne and solvent-free routes

Aqueous hydrolysates fit water-based baths, sizes and primers. Liquid oligomers suit routes where you want to control the addition of water yourself. Check how each one fits your bath preparation, drying step and working-solution life.

Plan for residual groups

An oligomer can still carry reactive alkoxy groups, which continue to react in your process. Vinyl/methoxy and vinyl/ethoxy grades, for example, differ in the alcohol they release, so plan handling around the grade you select.

Consider POSS for hybrid formulations

Functional POSS materials carry reactive groups on a silicon-oxygen cage. Use them to develop epoxy networks, thiol reactions and radical-cured resins, and match their functionality on a measured basis.

Use oligomers for water-repellent development

Octyl and isobutyl oligomers and an alkyl siloxane are available for treating concrete, masonry and mineral boards. Compare them with monomer and cream routes on your own substrate, and record the quantity actually absorbed.

Frequently Asked Questions

What is the difference between a silane oligomer and a prehydrolysate?

An oligomer is a short chain formed by partial condensation of silane monomers. A prehydrolysate has been reacted with water in advance and is usually supplied as an aqueous solution, ready for water-based processes.

Why would I choose an oligomer instead of a monomer?

Oligomers offer lower volatility and a different viscosity profile than monomers, and they can suit carriers or processes where a monomer is harder to handle. Compare them directly in your own treatment.

What is POSS?

POSS stands for polyhedral oligomeric silsesquioxane, a silicon-oxygen cage structure with organic groups attached. The ANCORIS range offers aminopropyl, epoxy, mercaptopropyl and methacryloxypropyl types.

Which ANCORIS grades are waterborne?

The grades ending in -W, such as ANCORIS 1020-W, 2020-W, 3010-W and 6010-W, are waterborne. Each one still needs its own bath preparation and drying plan, so check the TDS before you scale up.

Are these grades ready for scale-up?

They are development materials. Confirm bath life, drying and performance in your own trials before scale-up.

LANDUSIL technical specialist reviewing a document folder at a desk with a sample bottle and glassware

Samples and Technical Support

LANDUSIL provides samples, TDS and SDS for the grades on this page and can help you shortlist candidates. When you contact us, please include your substrate or resin, the treatment or addition route, your preferred carrier, estimated volume and destination country.