Coatings & Inks
Epoxy Siloxane for Equipment Coatings
Epoxy siloxane for equipment coatings brings silicone and epoxy chemistry into the binder design for industrial metal protection. With a matched cure package and prepared substrate, this route lets you develop the film's adhesion, exposure resistance and application behavior as one coating system.
LANDUSIL supplies epoxy-polysiloxane main-binder materials, epoxy-siloxane co-binders and functional silanes for equipment-paint manufacturers and maintenance-coating formulators. Choose the resin role first, then coordinate primer, finish, cure and the conditions the equipment will encounter.

What Epoxy Siloxane for Equipment Coatings Does
- Provides a protective binder route for industrial equipment and general metal finishes.
- Offers co-binder modification for compatible existing epoxy formulations.
- Supports prepared-metal adhesion through matched amino- or epoxy-functional interface chemistry.
- Connects resin chemistry to application by addressing viscosity, working time and film development together.
- Supports maintenance development through a coating sequence designed around retained layers and achievable preparation.
Typical Uses
Equipment or project: Petrochemical equipment exterior
What matters most
Weathering, process splash and a compatible primer/topcoat stack
Equipment or project: General machinery
What matters most
Shop application, production cure, handling and appearance
Equipment or project: Plant maintenance coating
What matters most
Old-film identification, contamination and achievable surface preparation
Equipment or project: High-solids protective finish
What matters most
Main-binder role, functional balance and application viscosity
Equipment or project: Outdoor metal fittings
What matters most
Coverage on edges, bolts, welds and recesses
Equipment or project: Repaired equipment surfaces
What matters most
Adhesion across repair boundaries and onto sound retained coating
Recommended LANDUSIL Products
| Product | Chemistry | CAS | Why choose it |
|---|---|---|---|
| LANDUSIL NOVERA 4010-L | Solvent-free epoxy polysiloxane resin | Mixture – see SDS | Main-binder route for high-solids protective coating development |
| LANDUSIL NOVERA 4020-L | Epoxy-siloxane blend binder | Mixture – see SDS | Co-binder or modification route within an existing epoxy formulation |
| LANDUSIL NOVERA 4030-L | Epoxy-modified silicone resin | Mixture – see SDS | Modified resin route for compatible industrial protective finishes |
| LANDUSIL LEGRA 1010-L | 3-Aminopropyltriethoxysilane | 919-30-2 | Primary-amine interface component for a matched resin and prepared metal |
| LANDUSIL LEGRA 2011-L | 3-Glycidoxypropyltrimethoxysilane | 2530-83-8 | Epoxy-functional interface component for suitable oxide surfaces and binders |
| LANDUSIL ANCORIS 1010-L | Low-VOC Amino Silane Oligomer | Mixture – see SDS | Amino-functional oligomer for developing glass fiber sizing, mineral surface treatments and compatible coating or adhesive interfaces |
| LANDUSIL NOVERA 4050-L-PMA70 | Epoxy Siloxane Resin in PMA, High-Boiling / Lower-Odor Solvent System | Mixture – see SDS | Epoxy siloxane resin in a PMA solvent system for developing industrial protective coatings and epoxy co-binders |
How to Select Your Binder and Interface Package
Main binder or co-binder
NOVERA 4010-L provides the main-binder starting point. Define its reactive composition, epoxy-equivalent basis and matched curing component. Include all reactive co-components in the balance, then establish usable application viscosity and film development at the intended thickness.
NOVERA 4020-L enters an existing epoxy formulation as a co-binder or modifying component. Keep the base-resin identity clear and compare a controlled series for compatibility, working time and cured properties. NOVERA 4030-L offers an epoxy-modified silicone resin route, with selection guided by the available reactive groups and supply form.
Amino or epoxy silane
LEGRA 1010-L has one primary amine and three ethoxy groups. Use it where the resin reaction chemistry and prepared metal-oxide interface support that role. Hydrolysis releases ethanol, and the amine contribution belongs in the working-time and cure assessment.
LEGRA 2011-L carries a glycidyl epoxide and three methoxy groups. Its hydrolysis releases methanol. Choose it around a compatible organic reaction partner and the intended interface-treatment process. An applied pretreatment and an in-paint addition create different routes for developing the bond.
Supply form and the coating stack
Compare liquid resins, solvent solutions and aqueous dispersions on an actual resin-solids basis. Solvent carriers affect drying and application, while aqueous supply forms introduce colloidal stability and water-removal requirements. Use Waterborne Industrial Coatings for that development route.
For a zinc-rich primer beneath the finish, continue with Ethyl-Silicate Inorganic Zinc-Rich Coatings. Its inorganic binding chemistry belongs in the primer design and has a different role from the organic epoxy-polysiloxane topcoat.
Application and Evaluation Guidelines
Describe normal operation, shutdown and cleaning. Record the metal, temperature, moisture, chemicals, concentration and contact duration. Distinguish intermittent splash from immersion and identify crevices or insulation that create a different local environment.
Set the achievable preparation method, including oil, dust, corrosion products and soluble salts relevant to the project. For maintenance, identify retained coating, its adhesion and the failure pattern. Apply trials to representative prepared metal, repair areas and sound old film as appropriate.
Document each layer, thickness, application method and interval between coats. Assess mixing, working time, wetting, sagging and coverage on edges and joints. Follow initial handling through the required cure and later exposure; include conditioned adhesion, water or chemical contact, weathering and repair-coat adhesion.
Interpret corrosion results for the tested construction and method. Salt-spray hours do not convert directly into years of service, and an adhesion promoter does not remove contamination or repair unsound old film. Set VOC and service claims from the finished formulation and complete coating evidence. Obtain the current TDS and SDS before establishing handling, mixing and return-to-service procedures.

Frequently Asked Questions
What is the difference between an epoxy-polysiloxane main binder and a blend binder?
The main binder supplies the principal resin phase with its matched cure package. A blend binder modifies an existing epoxy system. Compare them using their actual reactive contribution, solids basis and intended position in the formulation.
Which silane should I use in an industrial metal primer?
Amino and glycidoxy silanes provide different reaction routes. Match the organic group to the binder, then compare the proposed addition or pretreatment on the prepared metal with initial and conditioned adhesion testing.
How should I evaluate a maintenance topcoat over old paint?
Identify the retained coating and its condition, reproduce the planned cleaning and repair, and apply the complete new system. Check intercoat wetting and adhesion after relevant aging, including the exact location of failure.
What exposure information is needed for equipment coating selection?
Provide the chemicals and contact duration, operating and shutdown temperatures, humidity, outdoor exposure and cleaning method. Include whether contact is splash or immersion, plus any inaccessible or locally aggressive areas.

Samples and Technical Support
LANDUSIL provides samples, TDS, SDS and binder/interface selection support; please include:
- Equipment part, metal and available surface preparation
- Exposure media, contact pattern and operating conditions
- Primer, retained coating and proposed coating sequence
- Application, cure, target thickness and performance methods
- Estimated quantity, packaging preference and destination country

