Skip to content
Browse by chemistry
Need help choosing?

Technical guide Documentation & interpretation

Understanding Typical Properties in Silicone Technical Data Sheets

Published by LANDUSIL · Last updated November 2026

What can a typical property tell you, and what still needs to be confirmed before selecting or purchasing a material?

Read the guide
Document reading

A value carries
its context.

Exact grade designationForm · revision · language · market
Property entryRead with
Property namequantity & unit
Test methodconditions
Material statepreparation

Typical property

Check its status before using it
as an acceptance requirement.
Keep footnotes attached.

A Technical Data Sheet helps you organize technical questions about an identified grade. Read each value together with its label, unit, test conditions and document context. Then decide what additional evidence your application or purchasing agreement requires.

01 Check the identity

Confirm the document belongs to the material

Start with the product name and exact grade designation. Check the supplied form, document language, revision or issue date, and any stated market context. Record the document source for future reference.

Do not silently shorten a grade name or omit a suffix when requesting clarification. If a quotation, sample label and TDS use different designations, ask whether they refer to the same material before combining their information.

LANDUSIL technical specialist reviewing a document folder at a desk with a sample bottle and glassware
Exact grade including suffixSupplied form and material stateDocument context language · revision · market

Also identify the state to which a property belongs. Manufacturer sheets may separate the supplied material from a cured specimen and state the preparation conditions. Those headings are part of the meaning of the data.

02 Know what the data can support

Distinguish typical data from agreed requirements

Read the statement above and below a property table before using its values. A sheet may identify a table as typical properties and say the values are unsuitable for writing specifications. That is a document-specific instruction and a useful reason to check the status of data in every candidate sheet.

Use three separate questions in your review:

Typical property in a TDS
What technical characteristic does the document describe, under which conditions?
Agreed specification or acceptance requirement
Which limits, methods and acceptance rules have the parties actually agreed?
Batch-specific quality information
What information relates to the identified batch, and how was it determined?

Request clarification when the document does not establish which category applies. Do not create an acceptance range by placing your own tolerance around a typical value. If a property is essential to purchasing, raise it explicitly and confirm how it will be addressed in the agreed requirements.

03 Keep the context attached

Read the full property description

Capture the property name, unit, method reference and stated conditions together. “Viscosity” alone is incomplete as a comparison label. ASTM D445 addresses kinematic viscosity and calculation of dynamic viscosity, while ASTM D2196 addresses apparent viscosity and other rheological properties of non-Newtonian materials using rotational measurement. These titles describe different measurement contexts. ASTM D445, ASTM D2196

Read together
Propertyname & quantity
Unitreported measure
Methodreference
Conditionsstate & preparation

For a rotational viscosity value, ask for the relevant measurement conditions when they are absent. ASTM D2196's public description explains why observations at more than one rotational speed can provide additional characterization of a non-Newtonian material. A unit conversion alone cannot supply missing test conditions. ASTM D2196 scope and significance

Apply the same reading discipline to other rows: what material was tested, how was it prepared, and what does the reported endpoint mean? Use the named method to frame clarification, rather than assuming that similar property names guarantee equivalent measurements.

04 Put the reading method to work

Use an illustrative reading exercise

The following is an original document-reading exercise. It contains no product values and is not a LANDUSIL TDS, specification or representation of an available grade.

“Viscosity” with a unit only
What remains to be checked: Is the quantity dynamic, kinematic or apparent viscosity? What method and conditions apply?
“Hardness”
What remains to be checked: Which scale, specimen preparation and test conditions are identified?
“Solids content”
What remains to be checked: How does the document define and determine the reported quantity?
“Cured properties”
What remains to be checked: Which preparation and conditioning information accompanies the result?
“Typical value”
What remains to be checked: What further agreement is needed if the property will become an acceptance criterion?

The exercise is about asking complete questions. It does not imply that every silicone product should have all these properties on its sheet. Select the questions that matter to the actual material and intended use.

05 Make the comparison meaningful

Compare documents before comparing values

Build a comparison record with a separate column for each candidate. Preserve the original property names and add a field for unresolved differences. Leave an unavailable result marked as unavailable; do not estimate it from an unrelated grade.

LANDUSIL technical specialist taking notes at a desk beside laboratory glassware

Before ranking materials, check that:

Comparison review

0 of 7 reviewed

Use this as a review aid. The comparison still needs the qualifications below.

Where documents remain different, ask whether a common evaluation is needed. Avoid declaring technical equivalence from a short table of apparently similar values. Record what the comparison can support and what still requires confirmation.

06 Use the right information

Keep technical and safety questions connected

TDS

Technical characteristics
and their stated context

SDS

Product safety information
for the relevant destination

A TDS and an SDS serve different information needs. A technical table is not the complete safety document. Request the SDS for the exact product and relevant destination alongside technical information when needed.

Keep application evaluation separate as well. A document can help frame a shortlist, but your selection record should also state the intended system, process and performance requirements. Identify which questions the supplied literature answers and which need project-specific evidence.

07 Move the discussion forward

Turn missing information into a clear request

Send the grade designation, document title or revision, property in question and the comparison or purchasing decision you need to make. If possible, identify the missing condition directly: “Please confirm the method and temperature associated with this viscosity entry” is more useful than “Please send more details.”

Include your application, destination country or region and preferred document language. We will confirm the relevant documentation and its availability for the identified material and request.

08 Read the original sources

Technical references

These references explain reading principles. No referenced supplier's product data is presented as LANDUSIL data.

Explore LANDUSIL