Browse by chemistry
Need help choosing?

LEGRA · Ureido / Isocyanato Silanes

LANDUSIL LEGRA 7031-L 3-Isocyanatopropylmethyldimethoxysilane

LANDUSIL LEGRA 7031-L is 3-isocyanatopropylmethyldimethoxysilane, CAS 26115-72-0, for introducing dialkoxy silane functionality into suitable reactive polymers. Its NCO group provides the organic connection, while one silicon-bound methyl and two methoxy groups define the silicon-side structure.

This precursor gives polymer manufacturers a methyl-dimethoxy end-group option alongside trialkoxy silanes. Start with the parent polymer's available groups and architecture, then design the organic reaction and subsequent silane condensation around the material you intend to formulate.

CAS number
26115-72-0
Molecular formula
C7H15NO3Si
Molecular weight
189.28 g/mol
LANDUSIL LEGRA 7031-L sample bottle with LANDUSIL product card

Product Identity

ItemInformation
ProductLANDUSIL LEGRA 7031-L
Chemical name3-Isocyanatopropylmethyldimethoxysilane
CAS number26115-72-0
Molecular formulaC7H15NO3Si
Molecular weight189.28 g/mol
StructureO=C=N–(CH2)3–Si(CH3)(OCH3)2
Functional groupsOne isocyanate and two methoxy groups, with one silicon-bound methyl
Hydrolysis by-productMethanol
Product familyUreido / Isocyanato Silanes

Specifications

PropertyValueTest method
AppearanceColorless to light yellow, clear liquidVisual
Purity (GC)min. 95.0 %Gas chromatography

Typical Properties

PropertyTypical value
Refractive index, nD25approx. 1.4200
Flash point, closed cupapprox. 71 °C

Typical values are provided for reference only and are not to be construed as specifications. Please refer to the current Technical Data Sheet (TDS) and Certificate of Analysis (CoA) for the supplied grade.

Key Features

  • Organic NCO group: provides a reaction site for suitable hydroxyl or primary/secondary amine partners.
  • Methyl-dimethoxy silicon: offers two hydrolyzable sites for the later condensation stage.
  • Polymer end-group design: supports controlled introduction of silane functionality into a defined parent polymer.
  • Reaction-stage flexibility: allows pre-reacted resin and compatible interface routes to be assessed independently.
  • Two-stage chemistry: connects organic linkage formation with subsequent silanol and siloxane development.

Applications

  • Shiny industrial mixing tanks in a cleanroom

    Silane-terminated polymer manufacture

    A controlled reaction with a suitable hydroxyl-ended parent introduces methyl-dimethoxy silane groups for silane-terminated polymer synthesis. A defined polyether-functionalization route provides a useful starting model for selecting feed equivalents and analytical controls.

  • Stainless steel mixing reactors

    Functional polyurethane and polyurea intermediates

    Use appropriately characterized hydroxyl- or amine-functional segments when developing siloxane-modified polyurethane and polyurea. Define whether the desired result is end-group introduction, side-group attachment or a later connected siloxane structure, then select partners accordingly.

  • Worker holding a caulking gun

    Polyurethane assembly adhesive intermediates

    LEGRA 7031-L supports evaluation of controlled resin modification and compatible reactive interfaces for polyurethane industrial assembly adhesives. Keep polymer preparation, component blending and joint cure as defined stages in the development process.

  • Restoration expert applying black paint

    Metal-bonding primer development

    A prepared reactive resin or specifically designed dry primer route can be studied for metal bonding and lamination primers. Coordinate exposed oxide or coating, cleaning, treatment coverage and the next adhesive application step.

How to Use 3-Isocyanatopropylmethyldimethoxysilane

Identify the parent's actual reactive sites, functional equivalents, end-group distribution and water content. Distinguish hydroxyalkyl groups from silanols, and accessible amines from nitrogen already incorporated into amide or urea structures. Set additions using verified composition and functional analysis, then follow NCO conversion, free monomer, viscosity and storage.

Use dry materials for the intended organic reaction. Water can consume NCO and generate carbon dioxide, while methoxy hydrolysis releases methanol. Alcohol carriers also provide an NCO reaction partner. Coordinate these effects with later hydrolysis, drying and packaging, and assess residual water, methanol and available NCO at each stage.

Two methoxy groups define local silicon functionality; multifunctional parents and other reactions can still produce a network. Compare catalyst, humidity and section thickness through cure-completion trials, then test the actual bond or film after conditioning. NCO and NCO are not the complementary pair for conventional end-capping. Pre-reacted polymer, a dried primer and direct formulation addition need their own compatibility and residual-material assessment.

Guidelines for use

Controlled reaction
Define parent-polymer functional groups, equivalents and water content. Meter the silane under dry conditions with temperature control and mixing, and measure NCO conversion before subsequent formulation.
Interface trials
Distinguish a reacted polymer modifier from the original small molecule. Establish cleaning, deposition, drying residues and the time between priming and bonding for the intended substrate.
Cure assessment
Select the addition level in trials. Monitor free silane, residual NCO, viscosity and storage gelation, then measure moisture cure and conditioned bond failure against appropriate controls.

These levels are starting points. Determine the optimum level and method in trials under your own production conditions.

Packaging and Storage

  • Packaging: 25 kg plastic drum, 200 kg steel drum, 1,000 kg IBC. Other pack sizes on request.
  • Storage: Store in tightly closed original containers in a cool, dry, well-ventilated place, protected from moisture, heat and direct sunlight. Shelf life is 12 months in unopened containers under recommended conditions. Reseal promptly after dry sampling and transfer.
  • Handling and safety: Highly toxic by inhalation and capable of respiratory sensitization. Use closed transfer, local exhaust and suitable exposure controls. Can cause severe skin burns, eye damage and skin sensitization. Wear chemical-resistant gloves, clothing and eye/face protection. Water can consume NCO and generate carbon dioxide. Prevent moisture entry and pressure buildup in contaminated containers. Hydrolysis releases toxic methanol. Control vapors and keep away from heat and ignition sources. Read the Safety Data Sheet before use.
Blue plastic drums stored on pallets

Frequently Asked Questions

What is 3-isocyanatopropylmethyldimethoxysilane used for?

It is used to develop silane-functional polymers and reactive adhesive or primer intermediates. Its NCO group connects to a suitable parent, while the methoxy groups provide subsequent silicon-side chemistry.

How does the methyl-dimethoxy structure differ from trimethoxy silane?

It has two methoxy groups and one silicon-bound methyl. The trimethoxy analogue has three methoxy groups. Select the structure together with the parent polymer's functionality and planned cure package.

Which polymer groups can react with this NCO silane?

Suitable hydroxyl groups form urethane links, and suitable primary or secondary amines form urea links. Establish the actual group's accessibility and reaction conditions before calculating additions.

What should I measure during polymer end-capping?

Measure NCO conversion and residual free silane, retained alkoxy groups, polymer composition, viscosity and storage stability. Follow those checks with moisture-cure completion and application-specific performance tests.

LANDUSIL technical specialist in a lab coat holding a product sample bottle

Samples, TDS and Technical Support

LANDUSIL provides samples, current TDS and SDS, and selection support. Please include:

  • Parent polymer, available OH or amine groups and target architecture
  • Synthesis stage, receiving formulation and intended substrate or joint
  • Analytical and cure targets, estimated volume and packaging preference
  • Destination country