Browse by chemistry
Need help choosing?

ANCORIS · Functional POSS

LANDUSIL ANCORIS 7020-L Epoxycyclohexyl-Functional POSS

LANDUSIL ANCORIS 7020-L is an epoxycyclohexyl-functional POSS formulation for compatible epoxy resin development. It offers a cycloaliphatic epoxy POSS route for formulators designing coatings, adhesive layers and composite matrices around a matched cure package.

The cycloaliphatic epoxide is the organic reaction input. You can investigate cationic ring opening through suitable photoacid initiation or evaluate an appropriate thermal cure. Choose the chemistry around the measured epoxide content, receiving resin and the light or heat available in your actual process.

CAS number
Mixture – see SDS
LANDUSIL ANCORIS 7020-L sample bottle with LANDUSIL product card

Product Identity

ItemInformation
ProductLANDUSIL ANCORIS 7020-L
Chemical nameEpoxycyclohexylethyl polyhedral oligomeric silsesquioxane
Material typeCycloaliphatic epoxy-functional silsesquioxane formulation
CAS numberSee SDS
FunctionalityCycloaliphatic epoxy
Physical formViscous liquid
Product familyFunctional POSS – ANCORIS Silane Oligomers & Prehydrolysates

Specifications

PropertyValueTest method
AppearanceClear, pale yellow, viscous liquidVisual
Epoxy equivalent weight230 – 325 g/eqTitration

Typical Properties

PropertyTypical value
Viscosity, 25 °Capprox. 3.5 – 4.5 Pa·s
SolubilityAromatic and aliphatic epoxy resins

Typical values are provided for reference only and are not to be construed as specifications. Please refer to the current Technical Data Sheet (TDS) and Certificate of Analysis (CoA) for the supplied grade.

Key Features of Epoxycyclohexyl-Functional POSS

  • Cycloaliphatic epoxide design: provides an epoxy functionality route distinct from glycidyl ether POSS.
  • Cationic cure development: supports investigation with a compatible photoacid generator and suitable exposure conditions.
  • Thermal formulation option: allows assessment with a matched hardener or catalyst using measured reactive equivalents.
  • Hybrid resin component: brings functional silsesquioxane chemistry into the selected organic resin phase.
  • Process-specific selection: connects formulation compatibility, access to light or heat and final conversion with the material choice.

Applications

  • Green metal surface

    Functional coating development

    Assess ANCORIS 7020-L in compatible coating surface and processing formulations. Select the premix stage around the resin and cure package, then connect storage, appearance and conversion with the film properties you need.

  • Stack of thin glass discs on light surface

    Cationic UV coatings

    Develop a cationic epoxide route for UV and radiation-cured coatings. Match the photoacid system to the source spectrum and examine both the exposed film and its continued reaction after exposure.

  • Gloved hand placing a small liquid sample on a glass slide

    Cationic UV adhesive layers

    For cationic UV epoxy bonding, choose a joint with a defined illumination path and a compatible receiving resin. Include adhesive thickness, substrate preparation and post-exposure conditions when developing the cure sequence.

  • Applying epoxy to fibreglass with a brush

    Epoxy composite matrices

    Explore the grade in an epoxy composite matrix for glass fiber liquid molding. Match the ingredient to the actual thermal cure package and follow matrix viscosity, usable time and reinforcement wetting through laminate manufacture.

How to Use

Confirm composition, carrier or reactive diluent, supplied form, epoxide assay and method, moisture and residual monomer using the current TDS and SDS. Characterize the silsesquioxane distribution and resin compatibility. The POSS name does not establish a particular cage size, epoxy count or accessible silicon-bound groups for hydrolysis and mineral anchoring.

Choose the reaction route before setting the formulation. For cationic cure, check photoacid compatibility, light absorption, pigments, film thickness and post-exposure conversion. Water, bases and amine-containing ingredients can change that process. For a thermal route, evaluate the chosen anhydride, amine or other compatible system with its own equivalent balance, catalyst and cure conditions.

Monitor haze, domains, viscosity and storage after mixing, then measure gel behavior, heat evolution and residual epoxide. A conventional radical-acrylate initiator does not supply the cationic initiation required by an epoxide; design combined chemistries with the appropriate initiation for each function.

Compare films, joints or laminates with matched controls and consistent cure state. Assess adhesion, optical appearance and environmental ageing according to the intended use. Thin-film exposure, opaque adhesive joints and thick composite sections require their own conversion checks. Test scratch, corrosion, thermal and electrical targets on the complete formulation.

Guidelines for use

Incorporation
Blend into the resin or a compatible solvent; check clarity before adding photoinitiator or hardener.
Cure
Cure cationically (UV with a photoacid generator) or with anhydride or amine hardeners.

These levels are starting points. Determine the optimum level and method in trials under your own conditions.

Packaging and Storage

  • Packaging: 25 kg plastic drum, 200 kg steel drum, 1,000 kg IBC. Other pack sizes on request.
  • Storage: Store in tightly closed original containers in a cool, dry place away from direct sunlight. Shelf life is 12 months from the date of manufacture in unopened containers.
  • Handling and safety: Avoid dust and skin contact; wear gloves and eye protection. Handle in a well-ventilated area. Read the Safety Data Sheet before use.
Blue steel chemical drums in storage

Frequently Asked Questions

What is epoxycyclohexyl-functional POSS used for?

It is an ingredient for developing compatible epoxy coatings, adhesives and composite matrices. Select the cure around measured epoxide content and the complete resin formulation.

How is it different from glycidyl-functional POSS?

The organic epoxide structures differ. Compare hardener or initiator response, equivalent balance and conversion under your intended processing conditions.

What should I check for cationic UV cure?

Check the photoacid system, source spectrum, film or joint thickness and interfering ingredients. Measure immediate and later conversion and assess the actual bonded or coated article.

Can I evaluate a thermal epoxy formulation?

Yes. Design a trial with the chosen hardener and catalyst, measured epoxide content and appropriate mixing controls. Follow exotherm, gel behavior, conversion and conditioned properties.

LANDUSIL technical specialist reviewing a document folder at a desk with a sample bottle and glassware

Samples, TDS and Technical Support

LANDUSIL provides ANCORIS 7020-L samples, TDS, SDS and selection support. Please include:

  • Resin, substrate and intended epoxide reaction route
  • Hardener or photoacid system, light source or thermal process
  • Thickness, working-time and conditioned-performance targets
  • Estimated quantity, packaging preference and destination country