Browse by chemistry
Need help choosing?

UNARA · End-Capping Agents

LANDUSIL UNARA 2040-L 1,3-Divinyltetramethyldisiloxane (MV)

LANDUSIL UNARA 2040-L is 1,3-divinyltetramethyldisiloxane (MV), CAS 2627-95-4. The molecule has the structure ViMe2Si–O–SiMe2Vi, with a vinyl group on each silicon. It supplies vinyl-bearing terminal units in suitable siloxane equilibration and end-blocking routes.

An MV end blocker serves polymer producers designing terminal vinyl groups for a later reaction. The same molecule also has a platinum-complex ligand role in selected catalyst-manufacturing routes, where a platinum source and a controlled complex-preparation process are added.

CAS number
2627-95-4
Molecular formula
C8H18OSi2
Molecular weight
186.4 g/mol
LANDUSIL UNARA 2040-L sample bottle with LANDUSIL product card

Product Identity

ItemInformation
ProductLANDUSIL UNARA 2040-L
Chemical name1,3-Divinyltetramethyldisiloxane (MV)
CAS number2627-95-4
Molecular formulaC8H18OSi2
Molecular weight186.4 g/mol
AbbreviationMV / Vi₂MM
Product familyEnd-Capping Agents – UNARA Silicone Intermediates & Raw Materials

Specifications

PropertyValueTest method
AppearanceColorless clear liquidVisual
Purity (GC)min. 98.0 %Gas chromatography

Typical Properties

PropertyTypical value
Density, 25 °Capprox. 0.811 – 0.814 g/cm³
Flash point, closed cupapprox. 19 °C

Typical values are provided for reference only and are not to be construed as specifications. Please refer to the current Technical Data Sheet (TDS) and Certificate of Analysis (CoA) for the supplied grade.

Key Features of 1,3-Divinyltetramethyldisiloxane

  • Two vinyl groups: provides a defined vinyl-bearing disiloxane structure for synthesis planning.
  • Vinyl end-group source: can supply terminal vinyl units through appropriate catalyzed equilibration.
  • Chain-distribution control: end-blocker proportion is developed together with cyclic feed and catalyst conditions.
  • Ligand chemistry: offers a vinyl siloxane ligand for selected platinum-complex preparation routes.
  • Distinct from vinyl cyclics: supplies end-blocking chemistry, complementing cyclic feeds that introduce vinyl-bearing repeat units.

Applications

  • Glass dropper releasing a single drop of liquid

    Vinyl-terminated silicone fluid synthesis

    Use MV in suitable vinyl silicone fluid manufacturing routes. The cyclic feed, end-blocker charge and reaction conditions are chosen around the target terminal vinyl content and molecular-weight distribution.

  • Cream pellets on a yellow background

    Vinyl MQ resin development

    For MQ and vinyl MQ resin manufacturing, MV offers vinyl-bearing terminal-unit chemistry for evaluation in a compatible synthesis. The Q source, reaction sequence and workup establish how those units enter the resulting resin.

  • Scientist works with pipette and beaker

    Platinum-complex preparation

    Within functional silane and organosilicon intermediate synthesis, MV can act as a ligand feed for a platinum-containing complex. Catalyst production then includes the platinum source, complex formation, purification and activity assessment.

How to Use

For polymer synthesis, confirm identity, assay, vinyl content and impurities with current grade and batch documents. Select the cyclic feed and catalyst, then develop the end-blocker ratio against the required polymer architecture. Measure terminal vinyl, molecular-weight distribution, viscosity, residual cyclics and other volatile material after workup.

MV contributes two vinyl groups and is not a Si–H reagent or a platinum catalyst. Subsequent hydrosilylation needs a suitable Si–H source, an active catalyst and a formulation-specific reaction balance. Distinguish terminal vinyl introduced through end blocking from side-chain vinyl introduced through copolymer repeat units.

For MQ resin development, measure M/Q composition, vinyl content and remaining hydroxyl groups. For platinum-complex preparation, characterize platinum content, residual components and catalytic activity in the intended reaction. Qualify the resulting polymer, resin or catalyst as the manufactured product, using acceptance criteria matched to its receiving process.

Guidelines for use

End-blocking route
Choose the disiloxane-to-cyclic ratio from the intended chain length and measured vinyl requirement. Use dry, closed transfer, then verify terminal vinyl content, molecular weight, cyclic residues and volatile content after the validated reaction and finishing sequence.
Ligand or addition route
Use a defined catalyst-preparation procedure when introducing platinum. For an addition reaction, set the charge from measured vinyl and Si–H functionality and screen working time, heat release, conversion and residual components before scale-up. No general addition percentage is specified.

These levels are starting points. Where no numerical level is specified, determine the charge or concentration in process trials. Validate the method, product composition and operating conditions for your intended use.

Packaging and Storage

  • Packaging: 25 kg plastic drum, 200 kg steel drum, 1,000 kg IBC. Other pack sizes on request.
  • Storage: Store in original, tightly closed containers in a cool, dry, well-ventilated place protected from direct sunlight, moisture and ignition sources. Keep separate from oxidants and prevent contamination during sampling. Use a dry inert handling procedure where required. Shelf life is 12 months in unopened containers under these conditions.
  • Handling and safety: Highly flammable liquid and vapor. Bond and ground equipment, exclude ignition sources and ventilate transfer and heated operations. Suspected of damaging fertility or the unborn child. Avoid exposure and use suitable protective clothing, gloves and eye protection. Avoid skin and eye contact and breathing vapor or mist. Use closed handling and local extraction where needed. Protect from moisture, air contamination and strong oxidants; prevent unintended contact with active catalyst and reactive cure partners. Read the Safety Data Sheet before use.
Blue steel chemical drums in storage

Frequently Asked Questions

What is MV used for in silicone polymer production?

MV can supply vinyl-bearing terminal units in a suitable equilibration process. Its proportion is selected with the cyclic feed and catalyst to obtain the intended polymer chain distribution.

How does MV differ from V4?

MV is a divinyl disiloxane used for suitable end-blocking routes. V4 is a cyclic feed that introduces methylvinylsiloxane repeat units during copolymerization.

What is the role of MV in platinum catalyst preparation?

MV supplies a vinyl siloxane ligand. The platinum source, complex-formation process and subsequent characterization establish the platinum-containing catalyst product.

LANDUSIL technical specialist in a lab coat holding a document folder

Samples, TDS and Technical Support

LANDUSIL provides samples, current TDS and SDS, and synthesis-selection support. Please include:

  • Target polymer, resin or platinum-containing complex
  • Required vinyl location and content, plus the reaction route
  • Workup, residual-component and analytical requirements
  • Estimated quantity, packaging preference and destination country