Browse by chemistry
Need help choosing?

LEGRA · Epoxy Silanes

LANDUSIL LEGRA 2030-L 2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane

LANDUSIL LEGRA 2030-L is 2-(3,4-epoxycyclohexyl)ethyltriethoxysilane (CAS 10217-34-2), a cycloaliphatic epoxy silane for designed latex systems, inorganic surfaces and epoxy–siloxane materials. One cycloaliphatic epoxide is connected to a silicon end carrying three ethoxy groups.

The structure gives coating and hybrid-material developers an epoxy reaction option distinct from a glycidyl ether. You can design the organic conversion alongside ethanol-releasing hydrolysis and silicon condensation for the intended receiving system.

CAS number
10217-34-2
Molecular formula
C14H28O4Si
Molecular weight
288.46 g/mol
LANDUSIL LEGRA 2030-L sample bottle with LANDUSIL product card

Product Identity

ItemInformation
ProductLANDUSIL LEGRA 2030-L
Chemical name2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane
CAS number10217-34-2
Molecular formulaC14H28O4Si
Molecular weight288.46 g/mol
Epoxide typeCycloaliphatic epoxide
Silicon functionalityThree ethoxy groups on one silicon atom
EC number425-050-4
Hydrolysis by-productEthanol
Product familyEpoxy Silanes

Specifications

PropertyValueTest method
AppearanceColorless, clear liquidVisual
Purity (GC)min. 97.0 %Gas chromatography
Refractive index, nD201.4400 – 1.4500Refractometry

Typical Properties

PropertyTypical value
Boiling point, 0.4 mmHg114 – 117 °C
Flash point, closed cupapprox. 74 °C
Density, 25 °Capprox. 1.0035 g/cm³

Typical values are provided for reference only and are not to be construed as specifications. Please refer to the current Technical Data Sheet (TDS) and Certificate of Analysis (CoA) for the supplied grade.

Technical Data Sheet

LANDUSIL LEGRA 2030-L

Specification limits, typical properties, guidelines for use, handling, storage and packaging in one document.

Document
TDS-LEGRA-2030-L-EN
Revision
1.0, November 2026
Format
PDF, 2 pages, 106 KB
Language
English

Key Features of 2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane

  • Cycloaliphatic epoxide: offers a specific epoxy structure for deliberately chosen reaction conditions.
  • Triethoxy silicon end: provides three hydrolyzable sites for surface and hybrid development.
  • Ethanol release: identifies the alcohol produced during ethoxy hydrolysis.
  • Latex-formulation route: supports development with suitably functionalized dispersed polymers.
  • Precursor role: can enter controlled intermediate synthesis before a separately formulated coating cure.

Applications

  • Paint roller dipped in tray with paint

    Functional latex formulations

    Explore the silane in a designed formulation with a suitable carboxyl-containing polymer. In Waterborne Adhesive Interface and Emulsion Modification, identify the organic reaction partner and coordinate dispersion with later film development.

  • Hand brushing liquid onto a glass surface

    Glass and ceramic primers

    Use a formulated treatment on a suitable prepared surface before applying a compatible adhesive or coating. Glass and Ceramic Bonding Primers connects silane deposition with the selected organic cure mechanism.

  • Beaker in lab for science research

    Nanosilica and oxide treatment

    Investigate pretreatment of suitable silica or oxide particles followed by incorporation into a compatible resin. Colloidal Silica and Nano-Oxide Modification requires the actual particle surface and dispersion medium to be defined.

  • Hand using a curing lamp on a car windshield

    Cationic coating development

    Evaluate the cycloaliphatic epoxide with a suitable initiator and exposure or heating process. In UV & Radiation-Curable Coatings, a separately synthesized siloxane intermediate and a starting monomer represent different coating ingredients.

  • Laboratory glassware

    Epoxy-functional siloxane manufacturing

    Use the grade as an upstream precursor in a controlled hydrolysis or co-condensation route. For Epoxy-Functional Siloxane Intermediates, characterize residual epoxide, alkoxy groups and molecular distribution before the next reaction.

How to Use

Select the epoxide reaction first, then arrange hydrolysis and surface treatment around it. In latex development, compare direct addition with a deliberately prepared emulsion. Surfactants, co-solvents, polymer functionality and mixing influence the distribution; the starting silane is a separate ingredient from an aqueous emulsion.

Establish water balance, pH, treatment age and drying for the intended route. Ethoxy hydrolysis releases ethanol, and subsequent condensation can change particle interactions or deposited layers. Compare retained functionality, viscosity, dispersion and film defects along with conditioned adhesion.

For cationic curing, match initiator, light source, film thickness and conversion requirements. Evaluate thermal and other epoxy routes under their own actual conditions; a glycidyl-ether recipe or calculated equivalent weight alone does not establish the same cure response. Optical, corrosion and electrical results belong to the complete tested material. A hydrolyzable precursor also needs structural analysis before it can be described as a uniform oligomer or defined cage.

Guidelines for use

Waterborne formulation addition
Screen 0.5 – 5 % on total resin solids in a compatible functional binder. Establish dispersion, working life and stored viscosity before evaluating the cured film.
Addition route
Compare neat addition with a separately prepared emulsion where compatible surfactant and co-solvent are available. Select mixing and drying conditions for that formulation.
Surface and cure studies
Determine filler or primer treatment demand by trials. For cationic curing, match the initiator, exposure and film thickness, then measure epoxide conversion.

These levels are starting points. Determine the optimum level and method in trials under your own production conditions.

Packaging and Storage

  • Packaging: 25 kg plastic drum, 200 kg steel drum, 1,000 kg IBC. Other pack sizes on request.
  • Storage: Store in original, tightly closed containers in a cool, dry, ventilated place, protected from sunlight, moisture and heat. Shelf life is 12 months in unopened containers. Establish temperature control for the supplied grade and keep transfer equipment dry. Reseal promptly after sampling.
  • Handling and safety: May cause an allergic skin reaction. Prevent skin contact and use suitable chemical-resistant gloves, protective clothing and eye protection. Use ventilation and avoid breathing vapor or mist. Hydrolysis releases ethanol; control alcohol vapors during treatment preparation and drying. Keep away from moisture, oxidizing agents, uncontrolled reactive contamination, heat, flames and sparks. Avoid release to drains and the aquatic environment. Collect residues appropriately and read the Safety Data Sheet before use.
Blue steel chemical drums in storage

Frequently Asked Questions

What type of epoxide does LEGRA 2030-L contain?

Its epoxide is part of a cyclohexane-based structure. Select reaction conditions for that cycloaliphatic epoxide.

Which development routes are available for LEGRA 2030-L besides cationic UV?

Designed functional-latex systems and controlled thermal or other suitable epoxy reactions offer separate routes to investigate.

How should LED compatibility be evaluated in a UV formulation?

The initiator and light source must be matched. Wavelength, film thickness and the required conversion need to be evaluated in the actual formulation.

What is required to turn the supplied silane into an aqueous emulsion?

It is a starting silane ingredient. A prepared emulsion needs its own surfactants, mixing process and stability assessment.

LANDUSIL technical specialist in a lab coat holding a product sample bottle

Samples, TDS and Technical Support

LANDUSIL provides samples, TDS, SDS and technical selection support. Please include:

  • Polymer functionality, substrate or filler and cure package
  • Addition point, dispersion or treatment process
  • Target film, interface and exposure performance
  • Estimated quantity, preferred packaging and destination country