Browse by chemistry
Need help choosing?

UNARA · Silanol Co-Condensation Intermediates

LANDUSIL UNARA 6010-S Diphenylsilanediol

LANDUSIL UNARA 6010-S is diphenylsilanediol, CAS 947-42-2, with the structure Ph2Si(OH)2. Two phenyl groups and two Si–OH groups are attached to the same silicon. Suitable silanol co-condensation introduces diphenylsiloxane units into a polymer or intermediate designed for further formulation.

This building block gives silicone producers a direct silanol-bearing phenyl source. The selected coreactants, catalyst and end-blocking strategy determine how these units enter the resulting structure and how the manufactured material behaves during subsequent resin or fluid development.

CAS number
947-42-2
Molecular formula
C12H12O2Si
Molecular weight
216.31 g/mol
LANDUSIL UNARA 6010-S sample bottle with LANDUSIL product card

Product Identity

ItemInformation
ProductLANDUSIL UNARA 6010-S
Chemical nameDiphenylsilanediol
CAS number947-42-2
Molecular formulaC12H12O2Si
Molecular weight216.31 g/mol
AbbreviationDPSD
Product familySilanol Co-Condensation Intermediates – UNARA Silicone Intermediates & Raw Materials

Specifications

PropertyValueTest method
AppearanceWhite to off-white crystalline powderVisual
Purity (GC)min. 97.5 %Gas chromatography after silylation

Typical Properties

PropertyTypical value
Melting/decomposition intervalapprox. 138 – 142 °C
Bulk density, 20 °Capprox. 0.550 g/cm³

Typical values are provided for reference only and are not to be construed as specifications. Please refer to the current Technical Data Sheet (TDS) and Certificate of Analysis (CoA) for the supplied grade.

Key Features of Diphenylsilanediol

  • Two silanol reaction sites: provides silicon-bound hydroxyl groups for suitable condensation routes.
  • Diphenyl structure: introduces a phenyl-bearing siloxane unit while retaining both phenyl substituents.
  • Co-condensation feed: can be evaluated with appropriate silane or siloxane components selected for the target structure.
  • Polymer and resin development: offers a precursor choice for phenyl silicone fluids, resins and selected modified-resin routes.
  • Structure-specific control: residual silanol, low-molecular-weight components and molecular distribution provide useful reaction checkpoints.

Applications

  • Industrial glass equipment

    Silicone resin intermediate synthesis

    Use diphenylsilanediol in suitable methyl and phenyl silicone resin manufacturing routes. The complementary feedstocks supply the other structural units, and the reaction sequence controls condensation, by-products and the produced resin.

  • Clear glass with light and shadow patterns

    Phenyl silicone fluid development

    In phenyl silicone fluid manufacturing, diphenylsilanediol supplies diphenyl-bearing units through a suitable co-condensation route. End blockers and other functional feeds are selected to establish terminal groups and the remaining polymer composition.

  • Liquid being poured into measuring cup in lab

    Silicone-modified polyester development

    For silicone-modified polyester and alkyd resins, it can enter a selected route through a siloxane prepolymer. The prepolymer is then developed with the target polyester or alkyd system around compatibility and reaction requirements.

How to Use

Confirm grade identity, assay, moisture and impurities using current documents. Define the target phenyl structure and choose the silane or siloxane coreactants, catalyst and end blocker required by the synthesis. Evaluate incorporation and reaction progress in the actual medium, including the workup that removes by-products and low-molecular-weight material.

Follow residual silanol, conversion, molecular distribution, viscosity and clarity in the manufactured intermediate. Diphenylsilanediol is not a carbon-bound organic diol or a trialkoxysilane; its silicon-bound hydroxyl groups need a reaction route appropriate to silanol chemistry. Vinyl, dimethyl and additional network-building units require their corresponding feedstocks.

For modified polyester work, assess the prepolymer stage and subsequent reaction with the receiving resin. For a coating, optical material or electrical binder, evaluate the produced resin in the complete formulation against the required film, color, transparency, aging or electrical tests. Establish those requirements at the final-system level and use current grade data for incoming-material criteria.

Guidelines for use

Condensation charge
Set the amount from the validated silanol and co-reactant balance. Establish dissolution or dispersion, catalyst addition, mixing and temperature control in laboratory trials before scale-up. No universal addition percentage is specified for the different resin and oil routes.
Intermediate verification
Monitor conversion and viscosity and measure residual silanol and low-molecular species after finishing. For optical studies, characterize the complete formulation at the intended wavelength and thermal history; qualify impurities, color and clarity separately from the chemical conversion.

These levels are starting points. Where no numerical level is specified, determine the charge or concentration in process trials. Validate the method, product composition and operating conditions for your intended use.

Packaging and Storage

  • Packaging: 25 kg fiber drum or lined bag. Other pack sizes on request.
  • Storage: Store in original, tightly closed packaging in a cool, dry, well-ventilated place protected from moisture, direct sunlight and heat. Keep separate from incompatible reactive materials and prevent catalyst contamination during sampling. Shelf life is 12 months in unopened containers under these conditions. Check appearance and suitability before use in a sensitive synthesis route.
  • Handling and safety: Avoid breathing dust and prevent skin and eye contact. Use local extraction during weighing and charging and wear suitable gloves and eye protection. Toxic to aquatic life with long lasting effects. Prevent release to drains, soil and surface water and collect spills for controlled disposal. Keep powder away from ignition sources and incompatible chemicals. Assess thermal behavior and possible condensation before heated processing. Prevent contamination during sampling; use a controlled procedure for addition to a reactive catalyst system. Read the Safety Data Sheet before use.
Blank cardboard carton in a warehouse aisle

Frequently Asked Questions

What is diphenylsilanediol used for?

It is a silanol intermediate for introducing diphenylsiloxane units through suitable condensation chemistry. Uses include the synthesis of phenyl silicone fluids, resins and selected siloxane prepolymers.

Where are the hydroxyl groups in diphenylsilanediol?

Both hydroxyl groups are attached to silicon. This structure gives it silanol reaction chemistry that differs from ordinary organic diols with hydroxyl groups on carbon.

How do I select a phenyl precursor for silicone synthesis?

Compare the required phenyl-unit structure and the reaction sites. A silanediol, alkoxysilane and phenyl cyclic each require a route matched to their chemistry and the desired polymer.

LANDUSIL technical specialist in a lab coat holding a document folder

Samples, TDS and Technical Support

LANDUSIL provides samples, current TDS and SDS, and selection support for silanol intermediates. Please include:

  • Target resin or fluid, phenyl structure and end-group requirements
  • Coreactants, catalyst and reaction medium
  • Workup, residual-silanol and final-formulation criteria
  • Estimated quantity, packaging preference and destination country