Coatings & Inks
Silicone Materials for Paper Surface Coatings
Silicone materials for paper surface coatings help you develop surface contact, waterborne finishing and selected reactive interfaces. A useful formulation balances the intended surface effect with winding, printing and lamination, so the coated web stays practical through converting.
LANDUSIL supplies vinyl siloxane emulsion, silicone fluid, resin micropowder and functional silanes for paper and pretreated-film coating trials. Start with the actual paper or film and the coating's role, then choose the chemistry that fits its absorption, surface treatment and downstream use.

What Silicone Materials for Paper Surface Coatings Do
- Provide a reactive emulsion route for compatible waterborne paper-finishing systems.
- Adjust surface friction through an appropriate fluid and incorporation method.
- Offer particle-based surface effects for feel, contact and optical development.
- Support selected interface reactions where the receiving surface and binder provide a matched route.
- Connect surface design to converting by including printing, bonding and roll contact in the material comparison.
Typical Uses
Paper or film project: Waterborne specialty-paper finish
What matters most
Absorption, emulsion compatibility, drying and chosen crosslinking process
Paper or film project: Slip or blocking control on paper
What matters most
Contact pair, winding, stored-roll behavior and printability
Paper or film project: Functional paper coating
What matters most
Coverage and the specific liquid or vapor property required
Paper or film project: Pretreated polymer-film coating
What matters most
Actual treatment, coating adhesion and laminating adhesive
Paper or film project: Waterborne paper/film hybrid
What matters most
Bath stability, drying, reaction and retained surface function
Recommended LANDUSIL Products
| Product | Chemistry | CAS | Why choose it |
|---|---|---|---|
| LANDUSIL DUVERA 5070-E-45 | Vinyl siloxane emulsion | Mixture – see SDS | Reactive silicone-emulsion route for waterborne paper finishing |
| LANDUSIL DUVERA 1010-L | Polydimethylsiloxane / dimethyl silicone fluid | 63148-62-9 | Surface-fluid route for friction and finishing trials |
| LANDUSIL SIVERA 6010-P | Silicone resin micropowder | Mixture – see SDS | Particle route for coating-surface feel, contact and optical studies |
| LANDUSIL LEGRA 2010-L | 3-Glycidoxypropyltriethoxysilane | 2602-34-8 | Epoxy-functional interface option for a suitable surface and resin partner |
| LANDUSIL LEGRA 4011-L | 3-Methacryloxypropyltrimethoxysilane | 2530-85-0 | Methacrylate interface route within a designed radical-curing formulation |
How to Select a Paper or Film Material
Reactive emulsion or surface fluid
DUVERA 5070-E-45 provides vinyl siloxane emulsion for paper-finishing development. Define its actual vinyl functionality and compatible crosslinking route with the receiving binder. Assess the full emulsion package at working composition before choosing the application conditions.
DUVERA 1010-L has a different position as a PDMS surface fluid. Select the viscosity and incorporation form for the binder and coating equipment, then compare friction and surface quality through drying and storage. Keep the principal film-forming binder identified in each trial.
Particle and interface routes
SIVERA 6010-P offers a resin-micropowder route for surface studies. Relate the supplied particle information and dispersion to coat thickness, roughness and optical targets. Check sediment and application uniformity alongside the finished surface.
LEGRA 2010-L carries a glycidyl epoxide with ethoxy groups; LEGRA 4011-L carries a methacrylate with methoxy groups. Choose the actual organic reaction partner and receiving interface. Ethoxy hydrolysis releases ethanol, while methoxy hydrolysis releases methanol, so include treatment age, carrier and drying in the process design.
Paper and film substrates
For paper, record furnish, sizing, mineral coat, existing binder, coated side and absorption. Those details determine the surface the new coating meets and how much liquid enters the fiber structure before drying.
For film, record polymer, skin layer, treatment side, treatment history and roll condition. Compare the actual coating delay and contamination state. Use the final coating or laminate bond to judge adhesion after setting the appropriate preparation route.
Application and Evaluation Guidelines
Prepare the complete bath at its working pH and composition. Include salts, pigments, surfactants and other additives in compatibility trials. Record mixing, foam, viscosity drift, phase uniformity and deposits under representative circulation and application conditions.
Record coat weight, web speed, drying conditions and the state of the web before winding. If using a reactive design, measure its appropriate cure endpoint after water removal. Compare coatings made from fresh and aged bath to connect working life with the actual film.
Assess coverage, streaks, pinholes and surface appearance, then friction and blocking under defined contact, pressure and storage conditions. Reproduce the intended ink, adhesive or overcoat after roll storage. Check wetting, print quality, bond strength, failure location and surface transfer.
Water beading alone does not establish vapor or grease barrier performance. A dyne reading does not establish the finished bond, and dry appearance does not establish vinyl crosslinking. Select absorption, transmission and oil-resistance methods for the actual construction and intended function. Release coatings, heat sealing, packaging contact and environmental claims each need finished-article evidence. Use current TDS/SDS information to guide handling and reactive-process planning.

Frequently Asked Questions
Which silicone emulsion can I evaluate for waterborne paper finishing?
DUVERA 5070-E-45 supplies a vinyl siloxane emulsion route. Match its functionality and emulsion package to the binder, crosslinking process and drying conditions, then compare the coated paper through converting.
How should I test a silicone slip additive on coated paper?
Measure friction with a defined contact pair, then check blocking, transfer and unwinding after relevant storage. Include the actual printing or adhesive operation to judge the complete surface balance.
What is the difference between paper and polymer-film coating trials?
Paper absorption and existing sizing or mineral coats affect deposition. Film trials depend on polymer, skin layer and treatment history. Use representative substrates and evaluate adhesion in each finished construction.
What should I measure for a water-repellent paper coating?
Assess wetting and absorption for liquid-water behavior, then measure vapor transmission or grease resistance if those functions are required. Compare coverage and performance after folding, rubbing or lamination as appropriate.

Samples and Technical Support
LANDUSIL provides samples, TDS, SDS and material-selection support; please include:
- Paper or film grade, existing layer and treatment-side details
- Binder, emulsion or reactive package and bath composition
- Coat weight, application, drying and winding conditions
- Required surface function, printing and lamination process
- Estimated volume, packaging preference and destination country

