Browse by chemistry
Need help choosing?

Silicone Manufacturing

Reactive Silicone Base Formulation and Curing Components

Reactive silicone base formulation brings preformed polymers, resins and curing ingredients together for the customer's next processing step. Matching the actual functional groups gives you control over the chosen cure route, while mixing and packaging preserve a usable base. This task links raw-material selection with compound production for later molding, extrusion or potting.

LANDUSIL supplies reactive silicone polymers, resin components and individual crosslinking or catalytic ingredients. Base manufacturers can select a vinyl Si–H addition cure branch or a silanol condensation base, then define the complete receiving formulation and the conditions under which it will be mixed, stored and cured.

Shiny industrial mixing tanks in a cleanroom

What Reactive Silicone Base Formulation Controls

  • Reactive group balance. Confirmed polymer and resin functionality provides the basis for a meaningful crosslinking calculation.
  • Network architecture. Terminal and pendant groups offer different connection patterns in the intended cured material.
  • Resin contribution. Compatible MQ or functional silicone resins bring a resin phase into the base and may contribute measured reactive groups.
  • Processing consistency. Defined mixing, dispersion, filtration and deaeration help produce a representative batch for later processing.
  • Supply stability. Suitable component allocation and packaging keep the intended reaction available for the customer's operation.

Typical Uses

  • Base-manufacturing task: Vinyl polymer and hydride component preparation

    What matters most

    Actual vinyl and Si–H equivalents, distribution and complete catalyst system

  • Base-manufacturing task: Silanol-based condensation formulations

    What matters most

    Silanol functionality, compatible crosslinker and moisture management

  • Base-manufacturing task: Resin-containing reactive bases

    What matters most

    Resin identity, compatibility and contribution to reactive-group balance

  • Base-manufacturing task: Hydrolyzable-end-group formulations

    What matters most

    Terminal-group structure and storage before moisture exposure

  • Base-manufacturing task: Crosslinking-component manufacture

    What matters most

    Leaving-group chemistry, carrier and intended polymer partner

  • Base-manufacturing task: Filtered and deaerated base supply

    What matters most

    Homogeneity, rheology and subsequent cure response after filling

How to Select Polymers, Resins and Curing Components

Build the calculation around functional equivalents

Record the terminal and pendant groups of each polymer. Include the vinyl contribution from a vinyl MQ resin where that functionality is confirmed. Define the numerator and denominator of the reactive-group ratio used by your team, then connect the calculation to the intended network.

A vinyl-terminated PDMS and a polymer with pendant vinyl sites can have different functionality distributions. The same principle applies to hydride polymers. Measure the relevant groups on the actual grade and use the receiving formulation to establish its cure response.

Match the condensation branch

Silanol-terminated PDMS provides Si–OH groups for compatible condensation chemistry. Alkoxy-ended polymers have different terminal structures; methyl-dimethoxy and trimethoxy ends bring different numbers of hydrolyzable groups. Materials carrying more than one functional type require a defined reaction sequence.

Select silicone curing components by their leaving groups and polymer partner. Ketoxime components release the corresponding oxime, while acetoxy components release acetic acid. Methoxy hydrolysis releases methanol. Their by-products belong in the process, packaging and later use assessment.

Assign the resin and filler roles

Use vinyl MQ resin where confirmed vinyl participation supports the selected route. For ordinary MQ resin, evaluate residual silanol and compatibility using its actual grade data. Its resin contribution and any chemical participation deserve explicit definitions.

Specify fillers by their surface condition, moisture and dispersion requirements. A silylating reagent enters an upstream surface-treatment process; a treated filler enters compounding. Keep these supply stages clear when preparing the complete raw-material list.

Application and Evaluation Guidelines

Before trials, identify the catalyst, working-time controls, fillers and auxiliaries required by the complete formulation. Organotin catalysts serve compatible condensation chemistry; platinum-catalyzed hydrosilylation requires a suitable addition-cure catalyst system. The listed ingredients do not constitute a complete ready-to-use kit.

Define component allocation for storage and later combination. Evaluate handling materials and contamination relevant to the cure route. Follow mixing uniformity, dispersion, rheology, filtration effects and air removal through transfer and filling so the tested sample represents the dispatched base.

Check stored components for viscosity change, phase behavior, gel and subsequent cure response. Working time after combination and storage life before combination are different measurements. Qualify the base against its manufacturing specification, then assess the actual molded, extruded or potted article under its receiving application requirements. For injection molding, see Liquid Silicone Rubber for Injection Molding.

Clear gel close-up in transparent container

Frequently Asked Questions

Which polymers are used in reactive silicone bases?

Vinyl-terminated PDMS is a starting polymer for matched addition-cure systems. Silanol-terminated PDMS is a starting polymer for compatible condensation systems. Choose the actual end and side groups around your intended cure chemistry.

How is vinyl MQ resin included in an addition-cure formulation?

Include its confirmed vinyl functionality with the vinyl supplied by the polymer phase. Also account for carrier, resin content and compatibility in the complete formulation.

What should I test after silicone base mixing?

Check batch homogeneity, dispersion, rheology, air content and the relevant reactive groups. Repeat the intended cure assessment after representative storage and filling conditions.

LANDUSIL technical specialist in a lab coat holding a document folder

Samples and Technical Support

LANDUSIL provides samples, TDS, SDS and ingredient-selection support for reactive bases. Please include:

  • Target base, receiving operation and cure mechanism
  • Polymer end and side groups, resins and filler package
  • Catalyst system, component allocation and missing ingredients
  • Mixing, filling, storage and later cure acceptance requirements
  • Estimated quantity, packaging preference and destination country