Browse by chemistry
Need help choosing?

Coatings & Inks

Silicone Surface Additives for Coatings

Silicone surface additives for coatings give formulators several routes to controlled slip, tactile feel and surface appearance. You can use a physically blended fluid, incorporate a reactive siloxane into a compatible binder or disperse a particle for a specific optical or contact effect.

LANDUSIL supplies silicone fluids, functional polysiloxanes, MQ resin and silicone resin micropowder for these development tasks. Start with the surface behavior you want to change, then match the material form to your coating and the next printing, bonding or recoating operation.

Green metal surface

What Silicone Surface Additives for Coatings Do

  • Adjust surface contact behavior: fluid chemistry provides a route to tailored friction and feel.
  • Introduce flexible reactive segments: functional polysiloxanes can enter matched binder reactions.
  • Create particle-based surface effects: dispersed resin micropowder offers a route to tactile and optical modification.
  • Modify silicone-rich resin phases: MQ resin adds a resin-component option within a compatible film design.
  • Focus development on the process step: matching the ingredient to mixing, application or final surface contact makes trials easier to interpret.

Typical Uses

  • Formulation task: Industrial finish with a slip target

    What matters most

    Fluid compatibility, friction, craters and next-coat adhesion

  • Formulation task: Soft-touch or low-gloss coating

    What matters most

    Particle distribution, surface feel, gloss and haze

  • Formulation task: Anti-blocking finish

    What matters most

    Contact surfaces, storage load, transfer and marking

  • Formulation task: Waterborne coating with bubbles

    What matters most

    Air entry, circulation, foam persistence and cured-film defects

  • Formulation task: Silicone-rich functional film

    What matters most

    Resin compatibility, cure contribution and surface tack

  • Formulation task: Reactive surface modification

    What matters most

    Functional equivalents, reaction partner and phase behavior

How to Select a Surface or Processing Material

Physically blended fluids

DUVERA 1010-L offers a PDMS fluid starting point. DUVERA 2010-L introduces alkyl modification, which changes the organic character available for compatibility screening. Use the resin, carrier and wax package to choose the fluid grade and mixing approach.

Define the actual objective: substrate coverage, leveling texture, friction or feel. Observe the coating through dilution, drying and surface contact. A clear initial mixture gives useful mixing information, while the developing film shows how the fluid distributes as the carrier leaves.

Reactive polysiloxanes

DUVERA 5010-L carries epoxy termini for a matched epoxy reaction environment. DUVERA 5030-L provides a dual-end amino route. Confirm the available functional equivalents, then include their contribution in cure calculations and working-time trials.

A reactive siloxane introduces a flexible segment and changes the binder architecture. Plan the reaction around the actual functional group and partner, and compare phase uniformity before and after curing. This is particularly useful when you want to connect surface behavior with a defined resin modification process.

Resin phases and microparticles

NOVERA 3020-S belongs in the resin phase of a silicone-rich formulation. Select its delivery form and incorporation method around the other film components, then assess cohesion, tack and surface contact.

SIVERA 6010-P serves a particulate role. Request particle information for the supplied grade and relate the distribution to dry-film thickness, filtration and the application equipment. Choose the incorporation stage around dispersion, particle retention and the required finish.

Application and Evaluation Guidelines

Set a control coating and an acceptance criterion for each objective. Record supplied-material addition, mixing order, shear history, temperature and the interval before application. Use a controlled screening series before combining several material changes.

Evaluate stored liquid for viscosity change, settling, phase uniformity and redispersibility. During application, observe coverage, edge retreat, texture and bubbles on the actual prepared substrate. After drying or cure, assess gloss, haze, feel, friction and blocking using documented contact and conditioning conditions.

Reproduce the intended second coating, ink or adhesive. Include sanding or cleaning where these are production steps, together with early and delayed recoating intervals. Inspect wetting, intercoat adhesion, transfer and staining after the relevant contact aging.

Ordinary silicone fluid is not a formulated defoamer, and reactive functionality alone does not establish reduced migration. Foam removal, fine-air release and surface slip need individual assessment in the complete coating. For particles, obtain actual shape and size data; the micropowder name does not define spherical morphology. Review the TDS and SDS for each proposed grade before setting handling and reaction procedures.

Modern green tile wall with blank black frames

Frequently Asked Questions

How do I choose a silicone fluid for coating slip?

Specify the resin, carrier, target friction and contacting surface. Compare PDMS and alkyl-modified fluid using the actual application method, then assess appearance, blocking and subsequent bonding or recoating.

What is the difference between a reactive silicone and a silicone fluid additive?

A physically blended fluid changes the formulation through its compatibility and distribution. A reactive silicone carries a group designed to participate in a matched chemical reaction, so it also affects functional equivalents and network development.

When should I use silicone resin micropowder in a coating?

Consider a particle route when tactile feel, light scattering or surface contact is the main task. Match the grade's particle distribution to film thickness and dispersion equipment, then assess gloss, haze, texture and durability.

What information helps diagnose coating craters?

Provide the binder and carrier, additive package, mixing order, substrate preparation and drying or cure process. Retain control and affected panels, with photographs and film-thickness records, to locate when the defect develops.

LANDUSIL technical specialist seated at a desk presenting a flask of liquid sample

Samples and Technical Support

LANDUSIL provides samples, TDS, SDS and selection support for coating surface development; please include:

  • Resin, solvent blend or aqueous phase and current additive package
  • Target surface effect and photographs of the existing defect
  • Addition stage, mixing conditions and application equipment
  • Drying or cure process and later printing, bonding or recoating
  • Trial volume, packaging preference and destination country