Browse by chemistry
Need help choosing?

Electronics & Electrical

PDMS Ingredients for Microfluidic Replication

Microchannels and thin valve membranes need to preserve their shape through casting, cure, release and assembly. PDMS ingredients for microfluidic replication let developers design the network around those features and the liquid that will contact the finished structure.

LANDUSIL supplies reactive silicone polymers, Si–H components, vinyl resin and functional silanes for fabrication studies. Microfluidic and microstructure developers can select casting ingredients and a subsequent interface treatment around the required geometry, mechanical response and device function.

Circuit board milling machine

What PDMS Ingredients for Microfluidic Replication Do

  • Build an elastic casting network. Vinyl polymer and a matched Si–H component provide a reactive framework for replication.
  • Support mechanical adjustment. Polymer and resin choices give you variables for membrane and channel-wall response.
  • Enable detailed filling studies. Formulation flow can be developed around narrow mold features and thin regions.
  • Provide functional interface options. Selected amino or epoxy silanes support suitable surface-treatment studies after defining the exposed surface.
  • Connect fabrication with use. Material selection can address feature retention, bonding and interaction with the working liquid.

Typical Uses

  • End use: Microchannel replication

    What matters most

    Feature filling, trapped air and dimensions after release

  • End use: Elastic valve membranes

    What matters most

    Actual thickness, support geometry and repeated actuation

  • End use: Optical microstructures

    What matters most

    Replicated surface, wavelength, thickness and optical function

  • End use: Glass–PDMS bonding studies

    What matters most

    Prepared surfaces, alignment and channel accessibility

  • End use: Fluid-contact microdevices

    What matters most

    Swelling, solute partitioning, surface adsorption and extractables

How to Select a Microreplication Material

Let the feature define the formulation

Specify channel dimensions, mold features, membrane thickness and the support structure. For a valve, include the required movement and sealing task. For an optical microstructure, include the light path, wavelength and replicated surface requirements.

Design the full network

Use actual vinyl and Si–H equivalents and include reactive resin in the calculation. Select a matched catalyst and inhibitor package around the filling and cure window. Compare the resulting network response with the flexibility and dimensional requirements of the replicated part.

Coordinate filling, cure and release

Observe flow and air removal over the casting period, using representative corners and thin regions. Record mixing, transfer and cure history. Screen the mold and release treatment for cure-contact compatibility. Silicone Molding and Soft-Tool Release develops the mold-release interface task.

Choose the bonding or functional surface step

Identify the actual exposed surface and complementary chemistry for a silane treatment. Plan the surface preparation and post-treatment around the later bond or function. Sensor and Microdevice Surface Silanization addresses molecular functionalization and its relation to sensor response.

Application and Evaluation Guidelines

Compare clean cure references with the actual mold, release coating and adjacent materials. Inspect local cure at contact surfaces as well as the bulk. A commercial casting kit's mass ratio does not define the reactive-equivalent balance for these individual raw materials.

Measure channel geometry, tears and surface defects after release. Check bonded interfaces, continuity, alignment and leakage under the intended operating conditions. Softness does not establish valve sealing, and successful release cannot establish the later fluidic bond.

Keep amino or epoxy interface treatments distinct from the vinyl/Si–H casting reaction. Screen amino contact around uncured platinum systems. Record wetting after treatment with elapsed time and storage history; initial hydrophilicity requires a stability study for the actual formulation and thickness.

Evaluate the real liquid composition, exposure time and temperature. Distinguish swelling, solute absorption into PDMS, surface adsorption and extraction of mobile species. Low visible swelling does not establish unchanged analyte concentration. If conditioning or extraction is used, evaluate the treated material and final device for their intended function and purity requirements.

Printed circuit boards and electronics

Frequently Asked Questions

Which raw materials form an addition-cure PDMS replication material?

A vinyl-functional polymer, matched Si–H component and catalyst provide the network. A reactive vinyl resin can be included to study mechanical response and processing behavior.

How should a microfluidic valve membrane be evaluated?

Measure actual thickness and mechanical response in the supporting geometry. Check actuation, closure, sealing and behavior through repeated deformation.

What should be checked after bonding a PDMS channel to glass?

Inspect alignment, channel continuity and the complete bonded interface. Evaluate leakage and deformation under the intended operating and liquid-exposure conditions.

Why should liquid compatibility include more than swelling?

Solutes can partition into PDMS and mobile material can be extracted from it. Measure the fluid and device response as well as dimensional change when concentration or cleanliness matters.

LANDUSIL technical specialist in a lab coat holding a flask of liquid sample

Samples and Technical Support

LANDUSIL provides samples, TDS, SDS and network or interface ingredient support. Include:

  • Feature geometry, membrane target and mold material
  • Mixing, casting, cure and release requirements
  • Bonding route and prepared surface
  • Working liquid, exposure and functional measurements
  • Estimated quantity, packaging preference and destination country