
Electronics & Electrical
Silicone Raw Materials for Electronics
Electronic assemblies need materials that fit the space, the contacting surfaces and the manufacturing sequence. Silicone raw materials for electronics let formulators build compliant potting networks, protective films, filled thermal interfaces and insulating constructions around those requirements.
LANDUSIL supplies reactive polysiloxanes, silicone resins, functional silanes and intermediates for electronic material development. Start with the function you need, then choose the polymer, binder or surface treatment that enters the right process step. The application pages below connect that task to specific ingredients and practical evaluation work.

Who We Supply
- Electronic encapsulant developers designing soft gels or elastomeric potting compounds for power modules, sensors and component assemblies.
- PCB coating manufacturers balancing thin coverage, board adhesion, selective application and access for repair.
- Electrical adhesive formulators matching glass, ceramic, metal oxide and filled resin interfaces to their cure chemistry.
- Thermal material producers managing high filler loading, dispensing, contact thickness and stability in pads, gap fillers and greases.
- Electrical insulation manufacturers developing mica binders, winding varnishes and liquid media around their complete insulation construction.
- Optical and microdevice developers studying transparent networks, functional surface layers and controlled precursor processes.
Applications for Silicone Raw Materials for Electronics
Circuit protection and encapsulation
Choose the cured mechanical response early. A compliant gel cushions sensitive structures; an elastomeric encapsulant adds mechanical retention; a conformal coating follows the board as a thin film.
- Addition-Cure Gels & Electronic PottingBuild a lightly crosslinked vinyl/Si–H network for compliant coverage around sensitive electronic assemblies.
- Condensation-Cure Electronic SealingDevelop sealing systems using silanol or hydrolyzable polymer chemistry with a compatible crosslinking package.
- Electronic Conformal & Protective CoatingsSelect binders and cure routes for thin, controlled coverage on populated circuit boards.
- Elastomeric Electronic PottingFormulate a retaining elastomer around components while managing filling geometry and interface adhesion.
Bonding and electronic packaging
Surface chemistry connects the resin to its substrate or filler. Match the organic functional group to the binder reaction and establish a treatment process suited to the actual surface.
- Electronic Bonding & Substrate PrimersMatch primers and adhesion promoters to the two contacting materials and the adhesive chemistry.
- Underfill and Epoxy Encapsulation AdhesivesManage microgap filling, filler distribution and cure stress in epoxy encapsulation adhesives.
- Epoxy Molding CompoundsDevelop silica–resin interfaces for highly filled electronic molding compounds.
- Copper-Clad Laminates and Circuit SubstratesSupport glass reinforcement, mineral filler and resin interfaces through impregnation and lamination.
- Silver-Filled Conductive AdhesivesBalance adhesive bonding with electrical contact through the silver particle network.
Heat transfer and filled materials
A filled thermal interface combines powder selection with processing and assembly contact. Define whether the construction also requires electrical insulation before selecting the filler and matrix.
- Thermal Fillers & Electrical Insulation CompositesTreat thermal and insulating fillers to improve wetting, dispersion and matrix interaction.
- Cured Thermal Pads and Gap FillersCombine a cured silicone network with thermal filler for conformable pads and dispensed gap fillers.
- Non-Curing Thermal GreasesBuild a stable base-fluid and filler paste with controlled spreading and retention during service cycling.
Electrical insulation constructions
Binder film formation, winding penetration and liquid behavior call for different material choices. Select the supply form and processing route around the construction you manufacture.
- Electrical Insulation Resins & Mica BindersBind mica, paper and mineral structures with silicone resin ingredients suited to coating or impregnation.
- Coil Impregnation and Insulation VarnishesDevelop varnish compositions that penetrate windings and form a coherent cured insulation phase.
- Dielectric Silicone FluidsSelect silicone base fluids for liquid dielectric and heat-transfer development with controlled moisture and material compatibility.
Transparent encapsulation and bonding
Optical materials require attention to the whole light path, including thickness, neighboring coatings and the cured interface. Methyl and phenyl silicone ingredients support different formulations.
Surface preparation and microdevices
Small-scale structures depend on a defined surface and careful control of residues. Use the chemistry for a specific surface reaction or manufacturing operation.
- HMDS Surface Preparation for LithographyStudy HMDS treatment of prepared oxide surfaces before photoresist application.
- Sensor and Microdevice Surface SilanizationIntroduce accessible functional groups for sensor surface modification and immobilization studies.
- PDMS Microfluidics and MicroreplicationForm and bond replicated PDMS channels while evaluating feature fidelity and fluid interactions.
- TEOS for Electronic Silicon Oxide Film ResearchStudy TEOS identity, precursor delivery and impurity requirements for electronic silicon oxide film processes.
Key LANDUSIL Product Families for Electronics
The following grades illustrate the main ingredient roles across these applications. Each linked detail page gives a more focused shortlist for its manufacturing task.
| Product or grade group | Chemistry | Role |
|---|---|---|
| DUVERA 5020-L | Vinyl-terminated PDMS | Base polymer for a matched addition-cure formulation |
| NOVERA 3010-L | Vinyl MQ silicone resin | Reactive resin component for adjusting network behavior |
| DUVERA 5060-L | Silanol-terminated PDMS | Base polymer for condensation-cure development |
| NOVERA 2010-S | Solid methyl phenyl silicone resin | Binder ingredient for mica and electrical insulation constructions |
| NOVERA 4010-L | Epoxy polysiloxane resin | Binder component for protective coating development |
| LEGRA 2010-L | Glycidoxy epoxy silane with ethoxy groups | Interface treatment for compatible resins and inorganic surfaces |
| LEGRA 4011-L | Methacryloxy silane with methoxy groups | Coupling ingredient for compatible radical-curing resins |
| DUVERA 1010-L | Dimethyl silicone fluid | Base fluid for non-curing compounds and dielectric fluid studies |

How LANDUSIL Supports Your Development
LANDUSIL offers 174 grades across 8 product series, with samples, TDS, SDS and technical selection support. Packaging options extend from 25 kg containers to IBCs, according to the material and supply form. A useful selection brief connects the ingredient to the process where it will enter your formulation.
For addition-cure materials, establish the vinyl and Si–H balance together with a matched catalyst and contact-material compatibility. For condensation systems, review moisture access, reaction products and cure through the actual assembly. For filled materials, carry powder treatment through to measurements on the finished compound and its assembled interface.
Evaluation priorities
Agree on the required electrical, thermal, optical and environmental measurements before comparing grades. Check ions, volatiles, particles and relevant impurities against your process specification. General chemical identity does not establish electronic purity, equipment qualification or finished-device performance. Keep semiconductor surface processing, cured insulation and liquid dielectric evaluation tied to their own methods and constructions.
Frequently Asked Questions
Which silicone ingredients are used in electronic potting?
Addition-cure formulations combine a vinyl-functional polymer, a Si–H component and a matched catalyst. Condensation formulations use silanol or hydrolyzable polymer chemistry with the appropriate crosslinker and catalyst. Fillers and adhesion ingredients complete the formulation around the assembly requirements.
How do I choose between a thermal pad and thermal grease?
A pad or cured gap filler uses a polymer network to retain its form and conform under assembly pressure. A grease uses a non-curing fluid and powder structure. Compare gap geometry, dispensing, contact pressure and stability through cycling.
Which silane functional group suits an electronic adhesive?
Epoxy silanes suit compatible epoxy and interface reactions; amino silanes provide amine reactivity; methacryloxy silanes suit compatible radical-curing resins. Select the group with the adhesive cure and substrate treatment route in view.
What should I send for material selection?
Provide the receiving polymer, contacting materials, process step, geometry and target function. Add your test methods and purity requirements so the shortlist addresses the actual construction.
Samples and Technical Support
LANDUSIL provides samples, TDS, SDS and selection support for formulation and process trials. Include:
- The material you manufacture and its intended electronic or electrical function
- Polymer or resin, filler type and contacting substrates
- Mixing, coating, dispensing, molding or surface-treatment process
- Electrical, thermal, optical and environmental evaluation requirements
- Estimated volume, packaging preference and destination country

